UG-478 Datasheet, PDF (14/40 Pages) Analog Devices – Evaluation Board for the AD7176-2—24-Bit, 250 kSPS Sigma-Delta ADC with 20 μs Settling

UG-478
Installing the EVAL-SDP-CB1Z System Demonstration
Platform Board Drivers
After the installation of the evaluation software is complete, a
welcome window is displayed for the installation of the EVAL-
SDP-CB1Z system demonstration platform board drivers.
1. With the EVAL-SDP-CB1Z board still disconnected from
the USB port of the PC, make sure that all other applications
are closed, and then click Next.
Evaluation Board User Guide
3. Click Install to confirm that you would like to install the
drivers.
Figure 15. EVAL-SDP-CB1Z Drivers Setup:
Granting Permission to Install Drivers
4. To complete the drivers installation, click Finish, which
closes the installation wizard.
Figure 13. EVAL-SDP-CB1Z Drivers Setup:
Beginning the Drivers Installation
2. Select the location to install the drivers, and then click Next.
Figure 16. EVAL-SDP-CB1Z Drivers Setup:
Completing the Drivers Setup Wizard
5. Before using the evaluation board, you must restart the
computer.
Figure 14. EVAL-SDP-CB1Z Drivers Setup:
Selecting the Location for Drivers Installation
Figure 17. EVAL-SDP-CB1Z Drivers Setup:
Restarting the Computer
Rev. 0 | Page 14 of 40