UG-194 Datasheet, PDF (12/20 Pages) Analog Devices – Evaluation Board for the ADE7953 Single Phase Energy Metering IC

UG-194
READ AND WRITE REGISTERS
The Read and Write Registers window is available from the
MENU box. The Read and Write Registers window is shown
in Figure 17.
Evaluation Board User Guide
ACCESS ALL REGISTERS
The Access All Registers window is available from the MENU
box. The Access All Registers window allows all the registers in
the ADE7953 to be accessed at once (see Figure 18).
Figure 17. Read and Write Registers Window
An individual register can be accessed from this window by
selecting the register name from the pull-down menu. Alter-
natively, registers can be accessed by address by clicking the
Register Name toggle switch and then typing the address and
size of a register into the register address and register size boxes.
Figure 18. Access All Registers Window
The entire ADE7953 register bank can be read or modified
by clicking READ All Registers or WRITE All Registers. The
current configuration can be saved to a comma-separated
variable (.csv) file by specifying a destination file at the top
of the window and then clicking Save Current Register
Settings to File.
To load a configuration from a file, specify a configuration file
at the top of the window and then click Load Register Settings
from File. The contents of the specified .csv file are written to
the ADE7953.
Rev. A | Page 12 of 20