HMC1165 Datasheet, PDF (11/12 Pages) Analog Devices – Dual output frequency range

HMC1165
EVALUATION PRINTED CIRCUIT BOARD (PCB)
Data Sheet
Figure 17. Evaluation Board
The circuit board used in an application uses RF circuit design
techniques. Ensure that the signal lines have 50 Ω impedance
and that the package ground leads and backside ground paddle
are connected directly to the ground plane.
Use a sufficient number of via holes to connect the top and
bottom ground planes. The evaluation circuit board shown in
Figure 17 is available from Analog Devices, Inc., upon request.
BILL OF MATERIALS
Table 4. Bill of Materials, EV1HMC1165LP5
Item
Description
J1 to J4
PCB mount SMA RF connectors
J5, J6
2 mm dc headers
C1 to C3
100 pF capacitors, 0402 package
C4
1000 pF capacitor, 0402 package
C5 to C7
2.2 μF tantalum capacitors
C8
0.01 μF capacitor, 0603 package
U1
HMC1165 VCO
PCB¹
110225 evaluation board²
1 _{Circuit board material is Rogers 4350.}
2 _{Reference this number when ordering the complete evaluation PCB.}
Rev. 0 | Page 10 of 11