HMC1165 Datasheet, PDF (1/12 Pages) Analog Devices – Dual output frequency range

Data Sheet
11.07 GHz to 11.62 GHz, MMIC VCO with Half
Frequency Output
HMC1165
FEATURES
Dual output frequency range
fOUT = 11.07 GHz to 11.62 GHz
fOUT/2 = 5.535 GHz to 5.810 GHz
Output power (POUT): 8 dBm
Single-sideband (SSB) phase noise: −113 dBc/Hz at 100 kHz
No external resonator needed
RoHS-compliant, 5 mm × 5 mm, 32-lead LFCSP: 25 mm²
APPLICATIONS
Point to point and multipoint radios
Test equipment and industrial controls
Very small aperture terminals (VSATs)
FUNCTIONAL BLOCK DIAGRAM
NC 1
NC 2
NC 3
NC 4
GND 5
NC 6
NC 7
NC 8
HMC1165
24 NC
23 NC
22 NC
21 V_CC
20 NC
19 RFOUT
18 NC
17 NC
GENERAL DESCRIPTION
The HMC1165 is a monolithic microwave integrated circuit
(MMIC), voltage controlled oscillator (VCO) that integrates a
resonator, a negative resistance device, and a varactor diode,
and features a half frequency output.
Because of the monolithic construction of the oscillator, the
output power and phase noise performance are excellent over
temperature.
Figure 1.
The output power is 8 dBm typical from a 5 V supply voltage.
The VCO is housed in a RoHS-compliant LFCSP and requires
no external matching components.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com