UG-486 Datasheet, PDF (1/8 Pages) Analog Devices – Evaluation Board User Guide

Evaluation Board User Guide
UG-486
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: [phone] • Fax: [phone] • www.analog.com
iCoupler EVAL-ADuM5211EBZ, 150 mW isoPower Evaluation Board
FEATURES
isoPower integrated, isolated dc-to-dc converter
Regulated 3.15 V or 5.25 V output
Up to 150 mW output power
20-lead SSOP package with 5 mm creepage
High temperature operation: 105°C
High common-mode transient immunity: >25 kV/µs
SUPPORTED iCoupler® MODELS
ADuM5210
ADuM5211
ADuM5212
ADuM6210
ADuM6211
ADuM6212
GENERAL DESCRIPTION
The EVAL-ADuM5211EBZ supports the ADuM5210/
ADuM5211/ADuM5212 and ADuM6210/ADuM6211/
ADuM6212 150 mW isolated power modules. It provides
a JEDEC standard SSOP20 pad layout as well as support for
setting the desired output voltage, setting enable control and
providing multiple positions for on-board loads and bypass
capacitors.
isoPower devices employ high frequency, high power switching
circuits to enable power transfer across chip scale, air core
transformers. The evaluation board includes EMI mitigation
recommendations from the AN-0971 Application Note. With
the included techniques, this PCB and power module is capable
of meeting the requirements of CISPER22 Class A or Class B
depending on the voltage and load range.
Complete specifications for the ADuM5210/ ADuM5211/
ADuM5212 and ADuM6210/ADuM6211/ADuM6212 are
provided in the ADuM5210/ADuM5211/ADuM5212 and
ADuM6210/ADuM6211/ADuM6212 data sheets, available
from Analog Devices, Inc., and should be consulted in conjunc-
tion with this user guide when using the evaluation board.
EVALUATION BOARD
Figure 1. EVAL-ADuM5211EBZ Evaluation Board
See the last page for an important warning and disclaimers.
Rev. 0 | Page 1 of 8