AD9753ASTZ Datasheet, PDF (1/28 Pages) Analog Devices – 12-Bit, 300 MSPS High Speed TxDAC+ D/A Converter

FEATURES
12-Bit Dual Muxed Port DAC
300 MSPS Output Update Rate
Excellent SFDR and IMD Performance
SFDR to Nyquist @ 25 MHz Output: 69 dB
Internal Clock Doubling PLL
Differential or Single-Ended Clock Input
On-Chip 1.2 V Reference
Single 3.3 V Supply Operation
Power Dissipation: 155 mW @ 3.3 V
48-Lead LQFP
APPLICATIONS
Communications: LMDS, LMCS, MMDS
Base Stations
Digital Synthesis
QAM and OFDM
12-Bit, 300 MSPS
High Speed TxDAC+^® D/A Converter
AD9753^*
FUNCTIONAL BLOCK DIAGRAM
DVDD DCOM
AVDD ACOM
PORT1
LATCH
PORT2
LATCH
MUX
DAC
I_OUTA
I_OUTB
CLK+
CLK–
CLKVDD
PLLVDD
CLKCOM
PLL
CLOCK
MULTIPLIER
REFERENCE
AD9753
RESET LPF DIV0 DIV1 PLLLOCK
REFIO
FSADJ
GENERAL DESCRIPTION
The AD9753 is a dual, muxed port, ultrahigh speed, single-
channel, 12-bit CMOS DAC. It integrates a high quality 12-bit
TxDAC+ core, a voltage reference, and digital interface circuitry
into a small 48-lead LQFP package. The AD9753 offers excep-
tional ac and dc performance while supporting update rates up
to 300 MSPS.
The AD9753 has been optimized for ultrahigh speed applica-
tions up to 300 MSPS where data rates exceed those possible on
a single data interface port DAC. The digital interface consists
of two buffered latches as well as control logic. These latches
can be time multiplexed to the high speed DAC in several ways.
This PLL drives the DAC latch at twice the speed of the exter-
nally applied clock and is able to interleave the data from the
two input channels. The resulting output data rate is twice that
of the two input channels. With the PLL disabled, an external
2× clock may be supplied and divided by two internally.
The CLK inputs (CLK+/CLK–) can be driven either differen-
tially or single-ended, with a signal swing as low as 1 V p-p.
The DAC utilizes a segmented current source architecture
combined with a proprietary switching technique to reduce
glitch energy and to maximize dynamic accuracy. Differential
current outputs support single-ended or differential applica-
tions. The differential outputs each provide a nominal full-scale
current from 2 mA to 20 mA.
The AD9753 is manufactured on an advanced low cost 0.35 µm
CMOS process. It operates from a single supply of 3.0 V to 3.6 V
and consumes 155 mW of power.
PRODUCT HIGHLIGHTS
1. The AD9753 is a member of a pin compatible family of high
speed TxDAC+s providing 10-, 12-, and 14-bit resolution.
2. Ultrahigh Speed 300 MSPS Conversion Rate.
3. Dual 12-Bit Latched, Multiplexed Input Ports. The AD9753
features a flexible digital interface allowing high speed data
conversion through either a single or dual port input.
4. Low Power. Complete CMOS DAC function operates on
155 mW from a 3.0 V to 3.6 V single supply. The DAC full-
scale current can be reduced for lower power operation.
5. On-Chip Voltage Reference. The AD9753 includes a 1.20 V
temperature-compensated band gap voltage reference.
*Protected by U.S. Patent numbers 5450084, 5568145, 5689257, and
5703519.
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] © 2003 Analog Devices, Inc. All rights reserved.