AD7654_15 Datasheet, PDF (1/27 Pages) Analog Devices – 16-Bit, 500 kSPS PulSAR Dual, 2-Channel, Simultaneous Sampling ADC

Data Sheet
16-Bit, 500 kSPS PulSAR Dual,
2-Channel, Simultaneous Sampling ADC
AD7654
FEATURES
Dual, 16-bit, 2-channel simultaneous sampling ADC
16-bit resolution with no missing codes
Throughput:
500 kSPS (normal mode)
444 kSPS (impulse mode)
INL: ±3.5 LSB max (±0.0053% of full scale)
SNR: 89 dB typ at 100 kHz
THD: −100 dB at +100 kHz
Analog input voltage range: 0 V to 5 V
No pipeline delay
Parallel and serial 5 V/3 V interface
SPI®/QSPI™/MICROWIRE™/DSP compatible
Single 5 V supply operation
Power dissipation:
120 mW typical
2.6 mW at 10 kSPS
Packages:
48-lead low profile quad flat package (LQFP)
48-lead lead frame chip scale package (LFCSP)
Low cost
APPLICATIONS
AC motor control
3-phase power control
4-channel data acquisition
Uninterrupted power supplies
Communications
GENERAL DESCRIPTION
The AD7654 is a low cost, simultaneous sampling, dual-channel,
16-bit, charge redistribution SAR, analog-to-digital converter
that operates from a single 5 V power supply. It contains two
low noise, wide bandwidth, track-and-hold amplifiers that allow
simultaneous sampling, a high speed 16-bit sampling ADC, an
internal conversion clock, error correction circuits, and both
serial and parallel system interface ports. Each track-and-hold
has a multiplexer in front to provide a 4-channel input ADC.
The A0 multiplexer control input allows the choice of
simultaneously sampling input pairs INA1/INB1 (A0 = low) or
INA2/INB2 (A0 = high). The part features a very high sampling
rate mode (normal) and, for low power applications, a reduced
power mode (impulse) where the power is scaled with the
throughput. Operation is specified from −40°C to +85°C.
FUNCTIONAL BLOCK DIAGRAM
AVDD AGND REFGND REFx
DVDD DGND
INA1
INAN
INA2
A0
INB1
INBN
INB2
PD
RESET
TRACK/HOLD
×2
MUX
MUX ^SWITCHED
CAP DAC
MUX
CLOCK
CONTROL LOGIC AND
CALIBRATION CIRCUITRY
AD7654
IMPULSE
CNVST
Figure 1.
SERIAL
PORT ₁₆
PARALLEL
INTERFACE
OVDD
OGND
D[15:0]
SER/PAR
EOC
BUSY
CS
RD
A/B
BYTESWAP
Table 1. PulSAR® Selection
Type/kSPS
100 to 250
Pseudo Differential AD7660/
AD7661
True Bipolar
True Differential
18-Bit
Multichannel/
Simultaneous
AD7663
AD7675
AD7678
500 to 570
AD7650/
AD7652
AD7664/
AD7666
AD7665
AD7676
AD7679
AD7654
800 to 1000
AD7653
AD7667
AD7671
AD7677
AD7674
AD7655
>1000
AD7621
AD7623
AD7641
PRODUCT HIGHLIGHTS
1. Simultaneous Sampling.
The AD7654 features two sample-and-hold circuits that
allow simultaneous sampling. It provides inputs for four
channels.
2. Fast Throughput.
The AD7654 is a 500 kSPS, charge redistribution, 16-bit
SAR ADC with internal error correction circuitry.
3. Superior INL and No Missing Codes.
The AD7654 has a maximum integral nonlinearity of
3.5 LSB with no missing 16-bit codes.
4. Single-Supply Operation.
The AD7654 operates from a single 5 V supply. In impulse
mode, its power dissipation decreases with throughput.
5. Serial or Parallel Interface.
Versatile parallel or 2-wire serial interface arrangement is
compatible with both 3 V and 5 V logic.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©2002–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com