AAT7204 Datasheet, PDF (9/12 Pages) Advanced Analog Technology, Inc. – 6+1-CHANNEL BUFFER FOR TFT LCD

Advanced Analog Technology, Inc.
PACKAGE DIMENSION (CONT.)
TSSOP Power PAD-20
AAT7204
SYMBOL
A
A1
A2
b
C
D
E
E1
e
L
L1
y
θ
DIMENSIONS IN MILLIMETERS
MIN
TYP
MAX
---
---
1.20
0.05
---
0.15
0.08
1.00
1.05
0.19
---
0.30
0.09
---
0.20
6.40
6.50
6.60
---
6.40
---
4.30
4.40
4.50
---
0.65
---
0.45
0.60
0.75
---
1.00
---
0^o
---
8^o
---
---
0.076
DIMENSIONS IN INCHES
MIN
TYP
MAX
---
---
0.047
0.002
---
0.006
0.003
0.039
0.041
0.007
---
0.012
0.0035
---
0.0080
0.252
0.256
0.260
---
0.252
---
0.170
0.173
0.177
---
0.026
---
0.0177
0.0240
0.0295
---
0.039
---
0^o
---
8^o
---
---
0.003
Note:
1. CONTROLLING DIMENSION: MILLIMETERS
2. LEAD FRAME MATERIAL: OLIN C7025/EFTEC 64T
3. DIMENSION “D” DOES NOT INCLUDE MOLD FLASH, TIE BAR BURRS AND GATE BURRS. MOLD FLASH,
TIE BURRS AND GATE BURRS SHALL NOT EXCEED 0.006” [0.15 MILLIMETERS] PER END. DIMENSION “E1”
DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010” [0.25
MILLIMETERS] PER SIDE.
4. DIMENSION “b” DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL
BE 0.003” [0.08 MILLIMETERS] TOTAL IN EXCESS OF THE “b” DIMENSION AT MAXIMUM MATERIAL
CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE
BETWEEN PROTRUSION AND AN ADJACENT LEAD TO BE 0.0028” [0.07 MILLIMETERS]
5. TOLERANCE: ± 0.010” [0.25 MILLIMETERS] UNLESS OTHERWISE SPECIFIED
6. OTHERWISE DIMENSION FOLLOW ACCEPTABLE SPEC
7. REFERENCE DOCUMENT: JEDEC SPEC MO-153
–
–
– Advanced Analog Technology, Inc. –
Page 9 of 12
V 0.1