AAT7204 Datasheet, PDF (11/12 Pages) Advanced Analog Technology, Inc. – 6+1-CHANNEL BUFFER FOR TFT LCD

Advanced Analog Technology, Inc.
PACKAGE DIMENSION (CONT.)
SOP20
AAT7204
SYMBOL
A
A1
A2
b
C
D
E
E1
e
L
y
θ
DIMENSIONS IN MILLIMETERS
MIN
TYP
MAX
2.36
2.49
2.64
0.10
---
0.30
---
2.31
---
0.33
0.41
0.51
0.18
0.23
0.28
12.60
12.80
12.90
10.01
10.31
10.64
7.39
7.49
7.59
---
1.27
---
0.38
0.81
1.27
---
---
0.076
0^o
---
8^o
DIMENSIONS IN INCHES
MIN
TYP
MAX
0.093
0.098
0.104
0.004
---
0.012
---
0.091
---
0.013
0.016
0.020
0.007
0.009
0.011
0.496
0.504
0.508
0.394
0.406
0.419
0.291
0.295
0.299
---
0.050
---
0.015
0.032
0.050
---
---
0.003
0^o
---
8^o
Note:
1. CONTROLLING DIMENSION: INCH
2. LEAD FRAME MATERIAL: COPPER 194
3. DIMENSION “D” DOES NOT INCLUDE MOLD FLASH, TIE BAR BURRS AND GATE BURRS. MOLD FALSH,
TIE BAR BURRS AND GATE BURRS SHALL NOT EXCEED 0.006” [0.15 MILLIMETERS] PER END. DIMENSION
“E1” DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED0.010” [0.25
MILLIMETERS] PER SIDE.
4. DIMENSION “b” DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION
SHALL BE 0.003” [0.08 MILLIMETERS] TOTAL IN EXCESS OF THE “b” DIMENSION AT MAXIMUM MATERIAL
CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE
BETWEEN PROTRUSION AND AN ADJACENT LEAD TO BE 0.0028” [0.07 MILLIMETERS]
5. TOLERANCE: ± 0.010” [0.25 MILLIMETERS] UNLESS OTHERWISE SPECIFIED
6. OTHERWISE DIMENSION FOLLOW ACCEPTABLE SPEC
7. REFERENCE DOCUMENT: JEDEC SPEC MS-013
–
–
– Advanced Analog Technology, Inc. –
Page 11 of 12
V 0.1