English
Language : 

AAT3685 Datasheet, PDF (1/23 Pages) Advanced Analogic Technologies – Lithium-Ion/Polymer Battery Charger
AAT3685
Lithium-Ion/Polymer Battery Charger
General Description
BatteryManager™
Features
The AAT3685 BatteryManager™ is a highly inte-
grated single cell lithium-ion/polymer battery charg-
er IC designed to operate with USB port or line
adapter inputs. It requires the minimum number of
external components.
The AAT3685 precisely regulates battery charge volt-
age and current for 4.2V lithium-ion/polymer battery
cells. Regardless of the type of input power source
(USB or adapter), the AAT3685 can be programmed
for two separate constant current charge levels up to
1A. An optional Charge Reduction Loop is built in to
allow users to charge the battery with available cur-
rent from the charge supply, while keeping the port
voltage regulated.
Battery temperature and charge state are fully
monitored for fault conditions. In the event of an
over-voltage or over-temperature failure, the
device will automatically shut down, thus protecting
the charging device, control system, and the bat-
tery under charge. Status monitor output pins are
provided to indicate the battery charge status by
directly driving two external LEDs. A serial interface
output is available to report any one of 14 various
status states to a microcontroller.
The AAT3685 is available in a Pb-free, thermally-
enhanced, space-saving 12-pin 3x3mm TDFN
package and is rated over the -40°C to +85°C tem-
perature range.
• Adapter or USB Charger
— Programmable up to 1A Max
• 4.0V to 5.5V Input Voltage Range
• High Level of Integration With Internal:
— Charging Device
— Reverse Blocking Diode
— Current Sensing
• Automatic Recharge Sequencing
• Charge Reduction Loop
• Battery Temperature Monitoring
• Full Battery Charge Auto Turn-Off
• Over-Voltage Protection
• Emergency Thermal Protection
• Power On Reset and Soft Start
• Serial Interface Status Reporting
• 12-Pin 3x3mm TDFN Package
Applications
• Cellular Telephones
• Digital Still Cameras
• Hand-Held PCs
• MP3 Players
• Personal Data Assistants (PDAs)
• Other Lithium-Ion/Polymer Battery-Powered
Devices
Typical Application
Enable
Adapter or USB Input
Input Hi/Lo Select
RSETH
ADP/USB EN CHR
PWRSEL
SETH
BAT
SETL
TS
RSETL
AAT3685
GND
BATT+
C2
10μF
BATT-
STAT1
DATA
STAT2
TEMP
Battery Pack
Serial Data
3685.2006.10.1.3
1