JNPS-O826C Datasheet, PDF (3/5 Pages) 3M Electronics – 3M brand cnnector for 1.27mm Pitch Flat Cable

6 QUALITY PERFORMANCE
6-1 RATING
JNPS-O826
c
6-2 PHYSICAL
SPECIFICATIONS
TEST
DESCRIPTION
CONTACT
RETENnON
FORCE
REQUIREMENT
1.96N (200gf) Min.
CABLE
RETENTION
FORCE
Vertical Direction Fl:
4.9N (0.5 kgf) Min.
Horizontal Direction F2:
4.9N (0.5 kgf) Min.
* The value in ( _{) is reference}
TESTCONDmON
--
Tensile speed Smm I min
RELATED
STANDARD
VIBRAnON
MECHANICAL
SHOCK
SOLDERABILITY
SOLDERING HEAT
RESISTANCE
Electrical discontinuity
Less than l~s
SweepFreq.: lo-55Hz, Amplitude:
1.52mm(or 98 mls1, SweepCycle:
Imin., Sweeptime: 2 hours Sweepin
each direction: (X, y ,Z)
Electrical discontinuity
Less than Il1s
Wetting: 95% Min.
or
Zero cross time:
3 secondsMax
490 m/s", 11ms, Half sine shock pulse.
3 times / X, Y,z directions (Total 18
times)
Solder: Sn-3Ag-O.5Cu
-Wetting Measurement:
245°C, 3 seconds
-Wetting Balance Method
245°C
Connector should not have
any defect portions after test.
Dip soldering:
260°C, 10 seconds,2 times or
263°C, 5 seconds,2 times
* without Pre-heating
Soldering Iron:
Dependenceon soldering conditions
* It needthe evaluation
under actual conditions.
MIL-STD-
202F lOlA
MIL-STD-
202E 2138
JNTM-OO39
JISC0050
JNTM-OO40
6