81068-600C04 Datasheet, PDF (2/8 Pages) 3M Electronics – .050 × .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

3M^™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle
810 Series
C
2X .092
[2.34]
.310
[7.87]
Inch
[Imm]
Tolerance Unless Noted
.0
.00 .000
Inch ±.1 ±.01 ±.005
[ ] Dimensions for Reference Only
A
B
C
.015 X .015
[0.38] X [0.38]
See Note 1
Position 2
Position 1
.015 X .015
[0.38] X [0.38]
.050 Typ
[1.27]
.100 Ref
[2.54]
Contact
Quantity
020
026
036
040
050
060
068
080
100
A
1.060
[26.92]
1.210
[30.73]
1.460
[37.08]
1.560
[39.62]
1.810
[45.97]
2.060
[52.32]
2.260
[57.40]
2.560
[65.02]
3.060
[77.72]
PCB Thickness
.062 [1.57]
.094 [2.39]
.125 [3.18]
D
Long Latch
Table 1
Dimensions
B
C
D Short
(Ref.)
0.722
[18.34]
0.500
[12.70]
1.671
[42.44]
0.872
[22.15]
0.650
[16.51]
1.821
[46.25]
1.122
[28.50]
0.900
[22.86]
2.071
[52.60]
1.222
[31.04]
1.000
[25.40]
2.171
[55.14]
1.472
[37.39]
1.250
[31.75]
2.421
[61.49]
1.722
[43.74]
1.500
[38.10]
2.671
[67.84]
1.922
[48.82]
1.700
[43.18]
2.871
[72.92]
2.222
[56.44]
2.000
[50.80]
3.171
[80.54]
2.722
[69.14]
2.500
[63.50]
3.671
[93.24]
D Long
(Ref.)
1.842
[46.79]
1.992
[50.60]
2.242
[56.95]
2.342
[59.49]
2.592
[65.84]
2.842
[72.19]
3.042
[77.27]
3.342
[84.89]
3.842
[97.59]
Table 2
"F" Solder Tail Length ± .010
.090 [2.29]
.112 [2.84]
.143 [3.63]
.620 Ref
[ 15.75 ]
Short Latch
.165 ± .010
[ 4.19 ]
.440 ± .010
[11.18]
Position 1
Orientation Triangle
Notes:
1. This polarization bump does not exist on the 20 position header.
2. RecommNenodteeds:to be mated to the .050" X .100" Wiremount Socket 820 Series.
.828 Ref
[ 21.03 ]
.405
[10.29]
.265
[6.73]
2X Ø.116
[2.95]
.140 ± .010
[3.56]
.015
[0.38]
“F” (See Table 2)
.105
[2.67]
.160 Ref
[4.06]
.306 Ref
[7.77]
Ordering Information
PTH Right Angle Header
Ejector Latches
(If Ordered Separately)
Long Latches
3505-28B (black)
Short Latches
3505-29B (black)
81XXX - 5X0X03 - XX
Contact Quantity
(See Table 1)
Ejector/Latch System:
0 = None (Special Order)
5 = With Short Ejectors Installed (Special Order)
6 = With Long Ejector Latches Installed (Standard)
Plating suffix:
blank = 125 µ" tin lead tails (RIA E3 & C2 apply)
RB = 250 µ" matte tin tails (RIA E1 & C1 apply)
Contact Tail:
2 = Solder Tail for .062 [ 1.57 ] PC Board (Standard)
3 = Solder Tail for .094 [ 2.39 ] PC Board (Special Order)
4 = Solder Tail for .125 [ .318 ] PC Board (Special Order)
TS-0253-J
Sheet 2 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373