GBU6A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 100 Volts CURRENT - 6.0 Amperes)

DATA SHEET
SEMICONDUCTOR
GBU6A THRU GBU6M
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes
FEATURES
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
This series is UL listed under the Recognized Component
Index, file number E54214
High case dielectric
strength of 1500 VRMS
Ideal for printed circuit boards
Glass passivated chip junctions
High surge overload rating
High temperature soldering guaranteed:
260°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3kg) tension
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
0.020 R (TYP.)
0.310 (7.9)
0.290 (7.4)
0.085 (2.16)
0.065 (1.65)
0.100 (2.54)
0.085 (2.16)
GBU Unit:inch(mm)
0.880 (22.3)
0.860 (21.8)
0.160 (4.1)
0.140 (3.5)
0.075
(1.9) R.
0.125 (3.2) x 45^o
CHAMFER
0.740 (18.8)
0.720 (18.3)
0.080 (2.03)
0.060 (1.52)
0.050 (1.27)
0.040 (1.02)
0.710 (18.0)
0.690 (17.5)
0.140 (3.56)
0.130 (3.30)
9^o
TYP.
5^o
TYP.
0.085 (2.16)
0.075 (1.90)
MECHANICAL DATA
Case: Molded plastic body over passivated chip
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Mounting Position: Any (NOTE 2)
Mounting Torque: 5 in. - lb. max.
Weight: 0.15 ounce, 4.0 grams
0.080 (2.03)
0.065 (1.65)
0.190 (4.83)
0.210 (5.33)
Dimensions in inches and (millimeters)
0.022 (0.56)
0.018 (0.46)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
GBU GBU GBU GBU GBU GBU GBU
SYMBOLS
6A
6B
6D
6G
6J
6K
6M
Maximum Repetitive Peak Reverse Voltage
VRRM 50 100 200 400 600 800 1000
Maximum RMS Voltage
Maximum DC Blocking Voltage
VRMS
35
70 140 280 420 560 700
VDC
50 100 200 400 600 800 1000
Maximum average forward rectified
output current at TC=100°C (NOTE 1, 2)
I(AV)
6.0
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)TJ=150°C
Rating for fusing (t<8.3ms)
IFSM
I2t
175.0
127.0
Maximum instantaneous forward voltage drop
VF
1.0
per leg at 3.0A
Maximum DC reverse current at TA=25°C
5.0
rated DC blocking voltage per leg TA=125°C
IR
500
Typical junction capacitance per leg (NOTE 3)
Typical thermal resistance per leg (NOTE 1,2)
Cj
RQJA
RQJC
211.0
94.0
7.4
2.2
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
NOTES:
(1) Units case mounted on 2.6 x 1.4 x 0.06" thick (6.5 x 3.5 x 0.15 cm) Al. Plate heatsink
(2) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screws
(3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
UNITS
Volts
Volts
Volts
Amps
Amps
A2sec
Volts
uA
pF
/W
http://www.yeashin.com
1
REV.02 20120305