RL1N4001 Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SILICON RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere)

WILLAS
SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
* High reliability
* Low leakage
* Low forward voltage drop
* High current capability
FEATURES
* Extremely Low VF
* Extremely thin package
* Low stored charge
* Majority carrier conduction
RL1N4001
THRU
RL1N4007
0.1AM
Pb Free Product
A-405
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-O rate flame retardant
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
MECHANICAL DATA
* Weight: 0.20 gram
* Pb free plating
* Case:Molded plastic, JEDEC SOD-323(SC-76)
* Terminal : Solder plated, solderable per MIL-STD-750,
Method 2026
MAXIMUM RATINGS AND ELECTRICAL CHARAC^*T^PE^oR^laIS^riT^tyIC^:S^{Indicated by cathode band}
Ratings at 25 ^oC ambient temperature unless otherwise sp_*ec_Mifi_oe_ud._{nting Position : Any}
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
* Weight : 0.000159 ounce, 0.0045 gram
Dimensions in inches and (millimeters)
.059 (1
.043 (1
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 55^oC
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note)
Typical Thermal Resistance
Operating and Storage Temperature Range
SYMBOL RL1N4001 RL1N4002 RL1N4003 RL1N4004 RL1N4005 RL1N4006 RL1N4007 UNITS
MAXIMUM RATING AND ELECTRICAL C VRRM
VRMS
50
100
200
400
600
800 1000 Volts
35
70
140
280
420
560
700 Volts
Rating
2^V5^DoCC
50
ambient
100
200
400
600
temperature unless otherwise
800 1000
specified.
Volts
Single ph^IOase half wave, 60Hz, resistive¹o^.0f inductive load.
Amps
For capaIFcSMitive load, derate current by 2030%
Amps
CJ
R θ J A Parameter
Repeti^Tti^Jv^, e^TSP^TGeak Reverse Voltage
15
50
-65 to + 175
pF
Conditi⁰oCn/ Ws
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise no^Cted^o) ^{ntinuous Reverse Voltage}
CHARACTERISTICS
SYMBOL RL1N4001 RL1N4002 RL1N4003 RL1N40I0_F4 =RL11N400m05 ARLD1NC4006 RL1N4007 UNITS
Maximum Instantaneous Forward Voltage at 1.0A DC
Forward VVFoltage
1.1
Volts
Maximum DC Reverse Current
@TA = 25^oC
at Rated DC Blocking Voltage
@TA = 100^oC _{Reverse CIR urrent}
Maximum Full Load Reverse Current Average, Full Cycle
.375” (9.5mm) lead length at TL = 75^oC
Mean Rectifying Current
5.0^I F ^{= 100mA DC}
50_{VR = 10V DC}
30
uAmps
uAmps
NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts _{Peak forward surge current}
Capacitance between terminals
Back
Operating Temperature
Storage Temperature