LANEW Datasheet, PDF (1/4 Pages) Wall Industries,Inc. – 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range

LANEW Series
2 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
FEATURES
● Low Ripple & Noise
● 2 Watts Output Power
● Single and Dual Output
● External ON/OFF Control
● 2:1 Wide Input Voltage Range
● UL94-V0 Case Potting Materials
● Continuous Short Circuit Protection
● Input to Output Isolation up to 1KVDC
● SIP Package: 0.86 x 0.36 x 0.44 Inches
● No External Input and Output Capacitor Needed
SPECIFICATIONS: LANEW Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
5V nominal input
12V nominal input
24V nominal input
48V nominal input
4.5 – 9 VDC
9 – 18 VDC
18 – 36 VDC
36 – 75 VDC
Input Current
See Table
Input Filter
Capacitor Type
Input Voltage Variation
dv/dt
5V/ms, max
(Complies)
Input Surge Voltage (100ms max)
5V nominal input
12V nominal input
24V nominal input
48V nominal input
15 VDC
36 VDC
50 VDC
100 VDC
Input Reflected Ripple Current
(There is an external capacitor at input (See Note 2))
5V nominal input (100µF)
12V nominal input (100µF)
24V nominal input (10µF)
48V nominal input (10µF)
400mAp-p
150mAp-p
380mVp-p
170mVp-p
Start Up Time
(Nominal Vin and constant resistive Load)
Power Up
Remote ON/OFF
1ms typ
1ms typ
DC-DC ON
DC-DC OFF
Open or high impedance
Control pin applied current
4 ~ 8mA max (via 1KΩ)
Remote OFF Input Current (nominal input)
1mA max
Remote ON/OFF
Application Circuit
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy (Full load and nominal Vin)
Line Regulation (Low line to high line at full load)
Load Regulation (25% to 100% full load)
Cross Regulation (Dual)
Minimum Load (See Note 1)
Single Output
Dual Output
Asymmetrical load 25% / 100% FL
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
See Table
±1%
±0.5%
±0.75%
±1%
±5%
10% of full load