LANEH Datasheet, PDF (1/4 Pages) Wall Industries,Inc. – Single and Dual Output 1 Watt DC/DC Converter

LANEH Series
Single and Dual Output
1 Watt DC/DC Converter
FEATURES
● MTBF > 1M Hours
● 7 Pin SIP Package
● 1 Watt Output Power
● 3000VDC I/O Isolation
● Single and Dual Outputs
● UL 94V-0 Package Material
● Input 5, 12, 15, 24, and 48VDC
● Industrial Grade -40°C to +85°C “I” Option
DESCRIPTION
When your application demands low power, minimal board space, and a high level of input/output isolation is
necessary, the LANEH miniature converters offer superior solutions at an economical price. Users have a
multitude of options and operational ratings to choose from in custom-tailoring the converter to application
demands. Populating a scant 0.179 square inches of board space, the LANEH provides one watt of power while
maintaining specifications over the entire commercial operating temperature range.
SPECIFICATIONS: LANEH Series
All specifications apply @ 25°C ambient unless otherwise noted
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Input Voltage Range ..................................................... ±5%
Nominal Input Voltage ............... 5, 12, 15, 24, and 48 VDC
Input Voltage Tolerance................................................ ±5%
Input Filtering ......................................Low ESR Capacitors
Efficiency ................................................................. 70% typ.
Switching Frequency ......................................... 100KHz typ.
Isolation Voltage (Input to Output) .................3000VDC min.
Isolation Resistance ..................... 1000MΩ min. @ 500VDC
OUTPUT SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Output Voltage .......................................................see table
Voltage Tolerance...................±5% (nom. Line, 100% load)
Output Current .......................................................see table
Output Power .................................................... 1 Watt max.
Line Regulation (10% to 100% FL)......... ±1.2% / 1% of Vin
Load Regulation (10% to 100% FL)
5V output .......................................................... 15% max
9, 12, and 15V outputs ..................................... 10% max
Ripple/Noise (20 MHz BW).........................150mVp-p max.
PROTECTION SPECIFICATIONS
Short Circuit Protection....................................... Short term
Operating Temperature.................................... 0°C ~ +70°C
“I” suffix ....................................................-40°C ~ +85°C
Storage Temperature .................................. -25°C ~ +100°C
Cooling ................................................... Free air convection
MTBF........................................................... 1,000,000 hours
PHYSICAL SPECIFICATIONS
Dimensions
5, 12, 15, and 24V input.................19.5(L) x 6(W) x 10(H) mm
48V input.....................................19.5(L) x 7.5(W) x 10(H) mm
Case Material ......................... Non-Conductive black plastic
Potting material ......................................... Epoxy (UL94-V0)
Due to advances in technology, specifications subject to change without notice
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]