LANE6KV Datasheet, PDF (1/8 Pages) Wall Industries,Inc. – Single and Dual Output 1 Watt DC/DC Converter 7 pin SIP with 6KVDC Isolation

LANE-6KV Series
Single and Dual Output
1 Watt DC/DC Converter
7 pin SIP with 6KVDC Isolation
FEATURES
● Low Cost
● 6000VDC Isolation
● Input 5 and 12VDC
● Efficiency up to 75%
● MTBF > 2,000,000 hours
● Industry Standard Pinout
● Internal SMT Construction
● UL 94V-0 Package Material
● Output 5, 12, 15, ±5, ±12, and ±15VDC
● Temperature Performance –40°C to +85°C
SPECIFICATIONS: LANE-6KV Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min Nom Max Unit
INPUT (V_in)
Start Voltage (5V input models)
4.5
5
5.5 VDC
Start Voltage (12V input models)
10.8
12
13.2 VDC
Reverse Polarity Input Current
0.3 A
Input Surge Voltage (1000ms) (5V input models)
-0.7
9
VDC
Input Surge Voltage (1000ms) (12V input models)
-0.7
18 VDC
Input Filter
Internal Capacitor
OUTPUT (V_o)
Output Voltage Range
See Rating Chart
Output Voltage Accuracy
±1.0
±3.0 %
Output Voltage Balance
Dual Output, Balanced Loads
±0.1
±1.0 %
Load Regulation
Io = 20% to 100%
See Rating Chart
Line Regulation
For Vin Change of 1%
±1.2
±1.5 %
Output Power
1
W
Output Current Range
See Rating Chart
Ripple & Noise (20MHz)
Ripple & Noise (20MHz)
Ripple & Noise (20MHz)
Over Line, Load, and Temperature
100
150
mV_pk-pk
200
mV_pk-pk
5
mVrms
Temperature Coefficient
±0.01 ±0.02 %/°C
PROTECTION
Over Load
120
%
Short Circuit Protection
0.5 seconds max.
Input Fuse Recommendation (5V input models)
500mA Slow-Blow Type
Input Fuse Recommendation (12V input models)
200mA Slow-Blow Type
GENERAL
Efficiency
See Rating Chart
Switching Frequency
50
80
100 KHz
Isolation Voltage Rated
60 seconds
6000
VDC
Isolation Voltage Test
Flash Tested for 1 second
6600
VDC
Isolation Resistance
500VDC
10
GΩ
Isolation Capacitance
100KHz, 1V
15
20 pF
ENVIRONMENTAL
Operating Temperature (Ambient)
-25
+70 °C
Operating Temperature (Case)
-25
+90 °C
Storage Temperature
-40
+125 °C
Lead Temperature
1.5mm from case for 10 seconds
260 °C
Humidity
95 %
Cooling
Free air convection
MTBF
MIL-HDBK-217F @ 25°C, Ground Benign
2,000,000 Hours
PHYSICAL
Weight
3.9 grams
Dimensions
22 x 7.5 x 12.5 mm
Case Material
Non-conductive black plastic
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]