LANE-6KV Datasheet, PDF (1/5 Pages) Wall Industries,Inc. – 1 Watt Output Power 3000VACrms (6000VDC) I/O Isolation

Wall Industries, Inc.
Rev E
LANE-6KV SERIES
1 Watt Medical & Industrial DC/DC Power Converters
FEATURES
• 1 Watt Output Power
• Small SIP Package
• Single & Dual Outputs
• Low Coupling Capacity
• Short Circuit Protection
• -25°C to +85°C Operating Temperature
• MTBF > 2,000,000 Hours
• 3000VACrms (6000VDC) I/O Isolation
• Reinforced Insulation Rated for 300VAC Working
Voltage
• cUL/UL60950-1, CSA C22.2 No. 60950-1-03,
IEC/EN 60950-1 Industrial Safety Approvals
• UL60601-1, CSA C22.2 No. 601-1, IEC/EN 60601-1
(3rd Edition) Medical Safety Approvals
Size:
0.87 x 0.30 x 0.49 inches
22.0 x 7.5 x 12.5 mm
Weight:
0.14oz (3.9g)
DESCRIPTION
The LANE-6KV series of 1 watt DC/DC power converters are specially designed to provide ultra-high
levels of isolation in a miniature SIP package. This series consists of 12 models with nominal input
voltages of 5V and 12V and standard output voltages of 5V, 12V, and 15V in both single and dual
output configurations. The LANE-6KV has both industrial and medical (3rd edition) approvals and
offers an economical solution for many applications in industrial controls and instrumentation,
consumer electronics, and wherever a certified supplementary or reinforced insulation system is
required to comply with relative safety standards.
Model Number
LANE505N6KV
LANE512N6KV
LANE515N6KV
LANE1205N6KV
LANE1212N6KV
LANE1215N6KV
Input Voltage
5 VDC
(4.5 - 5.5 VDC)
12 VDC
(10.8 - 13.2 VDC)
Output
Voltage
5 VDC
12 VDC
15 VDC
5 VDC
12 VDC
15 VDC
Model Number
Input Voltage
Output
Voltage
LANE505ND6KV
LANE512ND6KV
LANE515ND6KV
5 VDC
(4.5 - 5.5 VDC)
±5 VDC
±12 VDC
±15 VDC
LANE1205ND6KV
LANE1212ND6KV
LANE1215ND6KV
12 VDC
(10.8 - 13.2 VDC)
±5 VDC
±12 VDC
±15 VDC
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Output Current Input Current (Typ)
Min ⁽¹⁾ Max No Load Max Load
Load
Regulation
4mA 200mA
303mA
10%
2mA 80mA 55mA 291mA
8%
1mA 65mA
295mA
8%
4mA 200mA
126mA
10%
2mA 80mA 30mA 121mA
8%
1mA 65mA
123mA
8%
DUAL OUTPUT MODELS
Output Current Input Current (Typ)
Min ⁽¹⁾ Max No Load Max Load
Load
Regulation
±2mA ±100mA
303mA
10%
±1mA ±40mA 55mA 267mA
8%
±1mA ±35mA
287mA
8%
±2mA ±100mA
126mA
10%
±1mA ±40mA 30mA 108mA
8%
±1mA ±35mA
117mA
8%
Output Efficiency Maximum
Power (Typ) Capacitive Load
1W
66%
680μF
1W
66%
680μF
1W
66%
680μF
1W
66%
680μF
1W
66%
680μF
1W
66%
680μF
Output Efficiency Maximum
Power (Typ) Capacitive Load
1W
66%
±220μF
1W
72%
±220μF
1W
73%
±220μF
1W
66%
±220μF
1W
74%
±220μF
1W
75%
±220μF
NOTES
1. The LANE-6KV series requires a minimum load on the output to maintain specified regulation. Operation under no-load conditions will not
damage these devices; however they may not meet all listed specifications.
2. All DC/DC converters should be externally fused at the front end for protection.
3. Other input and output voltages may be available, please contact factory.
05/22/2014
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 1 of 5