RLP Datasheet, PDF (1/5 Pages) Vishay Siliconix – Insulated Precision Wirewound Resistors Axial Leads

www.vishay.com
RLP
Vishay Sfernice
Insulated Precision Wirewound Resistors Axial Leads
In wirewound precision resistors, the RLP series holds a
leading position in professional applications whenever an
excellent stability of the ohmic value and a correspondingly
low temperature coefficient are required at the same time.
The RLP model resistors comply with the most stringent
requirements of the CECC 40-201-006 specification. The
series consists of 5 models covering the power range from
1 W to 10 W.
Non-inductive versions can be supplied on request by
specifying RLP-NI. For higher power dissipations, the use of
RH series resistors is recommended.
FEATURES
• 1 W to 10 W at 25 °C
• Approved according to CECC 40-201-006
• According to MIL-R-26/5C and MIL-R-26/6C
• Excellent stability < ± 0.3 % after 1000 h
• High power up to 10 W at 25 °C
• Low ohmic values 10 m available
• Low temperature coefficient  ± 50 ppm/°C
• Electrical insulation
• Climatic protection
• Termination = Pure matte tin or Sn/Ag/Cu according to the
ohmic value
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in millimeters
INSULATED
25 min.
A
25 min.
ØE
Ø B Ø a ± 0.02
SERIES
AND STYLE
A MAX.
Ø B MAX.
R > 0.15  R  0.15 
E ± 0.1
WEIGHT
g
RLP1
7
2.5
-
45° chamfer
max. 0.25 mm ₄
4 RLP1 - RLP2 a = 1 mm
RLP2
10.2
4.0
6
deep
L max.
RLP3 - 6 - 10 a = 1.2 mm
MOLDED
25 min.
A
25 min.
RLP3
14
5.54
9
RLP6
23.82
8.71
11
0.6
0.27
0.6
0.48
0.8
1.3
0.8
3.4
ØE
Ø B _{RLP1 - RLP2}
RLP10
46.78
10.32
180K
0.8
8.6
TECHNICAL SPECIFICATIONS
VISHAY SFERNICE SERIES AND STYLE
Reference CECC 40-201-006
Cross-Reference NF C83-210
Cross-Reference MIL-R-26/5C and MIL-R-26/6C
Power Rating, Pr
CECC 40-201-006 Power
Extended Sfernice Power
at 25 °C, P₂₅
at 70 °C, P₇₀
at 25 °C, P₂₅
at 70 °C, P₇₀
± 5 % E24
Ohmic Range in Relation to Tolerance
± 2 % E48
± 1 % E96
± 0.5 % E96
± 0.1 % E96
Qualified Ohmic Value Range 
CECC 40-201-006
Limiting Element Voltage, U_max. AC/DC
Critical Resistance
Note
•
Undergoes European Quality Insurance System (CECC)
RLP1
RLP2
RLP3
RLP6
A
B
C
D
RP8
RP7
RP4
RP5
RW81
RW80
RW79
RW74
1W
0.8 W
1.5 W
1.25 W
2.5 W
2W
-
1W
2W
3W
6W
0.8 W
1.65 W
2.5 W
5W
0.05  to 0.025  to 0.01  to
2 k
6.8 k
15 k
0.02  to
59 k
0.05  to 0.025  to 0.03  to
2 k
6.8 k
15 k
0.02  to
59 k
0.05  to 0.025  to 0.03  to
2 k
6.8 k
15 k
0.02  to
59 k
0.4  to
2 k
0.4  to 0.0499  to 0.3  to
6.8 k
15 k
59 k
Please consult Vishay Sfernice
1  to
470 
0.2  to
1.78 k
0.1  to
3.57 k
0.1  to
12.1 k
50 V
120 V
200 V
300 V
Out of nominal ohmic range
17 800 W
RLP10
E
RP6
RW78
-
10 W
8.2 W
0.06  to
150 k
0.06  to
150 k
0.06  to
150 k
0.3  to
150 k
0.1  to
40.2 k
720 V
51 100 W
Revision: 02-Apr-15
1
Document Number: 50009
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000