SN65LVDS125 Datasheet, PDF (1/12 Pages) Texas Instruments – 1.5 GBPS LVDS 4 X 4 CROSSPOINT SWITCH

www.ti.com
SN65LVDS125
SN65LVDT125
SLLS555A – DECEMBER 2002 – REVISED FEBRUARY 2003
1.5 Gbps LVDS 4x4 CROSSPOINT SWITCH
FEATURES
D Signaling Rates¹ >1.5 Gbps per Channel
D Supports Telecom/Datacom and HDTV Video
Switching
D Non-Blocking Architecture Allows Each
Output to be Connected to Any Input
D Total Jitter < 50ps
D 330 mW When Operating at 1.5 Gbps
D Compatible With ANSI TIA/EIA-644-A LVDS
Standard
D Available Packaging: 38-pin TSSOP
D 25 mV of Input Voltage Threshold Hysteresis
D Propagation Delay Times, 1 ns Maximum
D Inputs Electrically Compatible With LVPECL,
CML and LVDS Signal Levels
D Inputs and Outputs High Impedance on
Power Down
D Receiver Input and Driver Output ESD
Exceeds 8 kV
D Operates From a Single 3.3-V Supply
D Integrated 110-Ω Line Termination Resistors
Available With SN65LVDT125
APPLICATIONS
D TBD
DESCRIPTION
The SN65LVDS125 and SN65LVDT125 are 4x4 nonblocking
crosspoint switches. Low-voltage differential signaling (LVDS)
is used to achieve signaling rates of 1.5 Gbps per channel.
Each output driver includes a 4:1 multiplexer to allow any input
to be routed to any output. Internal signal paths are fully
differential to achieve the high signaling speeds while
maintaining low signal skews. The SN65LVDT125
incorporates 110-Ω termination resistors for those
applications where board space is a premium.
Designed to support signaling rates up to 1.5 Gbps for OC-12
clocks (622 MHz). The 1.5-Gbps signaling rate allows use in
HDTV systems, including SMPTE 292 video applications
requiring signaling rates of 1.485 Gbps. (Note: The ultimate
rate and distance of data transfer is dependent upon the
attenuation characteristics of the media, the noise coupling
to the environment, and other application specific
characteristics).
The SN65LVDS125 and SN65LVDT125 are characterized for
operation from –40°C to 85°C.
SN65LVDS125DBT ( Marked as LVDS125)
SN65LVDT125DBT ( Marked as LVDT125)
(TOP VIEW)
S10
1
S11
2
1A
3
1B
4
S20
5
S21
6
2A
7
2B
8
GND
9
VCC
10
GND
11
3A
12
3B
13
S30
14
S31
15
4A
16
4B
17
S40
18
S41
19
38
VCC
37
GND
36
1Y
35
1Z
34
1DE
33
2Y
32
2Z
31
2DE
30
GND
29
VCC
28
GND
27
3Y
26
3Z
25
3DE
24
4Y
23
4Z
22
4DE
21
GND
20
VCC
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
(1)The _{signaling rate of a line, is the number of voltage transitions that are made per second expressed in the units bps (bits per second).}
PRODUCT PREVIEW information concerns products in the formative or design
phase of development. Characteristic data and other specifications are design
goals. Texas Instruments reserves the right to change or discontinue these
products without notice.
Copyright  2002–2003, Texas Instruments Incorporated