SWS600L Datasheet, PDF (1/2 Pages) TDK Electronics – Single Output Low Profi le Power Supplies

SWS600/1000L Series
Single Output Low Profile Power Supplies
Features
u Low Cost
u Low Profile
u Active Power Factor Correction
u Universal Input (85 - 265VAC)
u Input Transient Protected IEC61000-4
u Low Acoustical noise
u Medical Certifications (SWS1000L)
u Global safety Approvals
u Variable speed fan
Key Market Segments & Applications
Specifications
Model
SWS600L
SWS1000L
Input Voltage range
-
85 - 265VAC (47 - 63Hz) or 120 - 350VDC
Inrush Current (115 / 230VAC)
A
20 / 40
Power Factor
-
Meets EN61000-3-2 Class A
Input Current (100/200VAC)
A
7.1 / 3.6 (3.3V: 5 / 2.5)
12 / 6
Temperature Coefficient
-
<0.02%/°C
Overcurrent Protection
-
>105%, Constant current style
Overvoltage Protection
V
125% -145%
Overtemperature Protection
-
Yes, cycle AC or Remote On/Off to reset
Hold Up Time (Typ)
ms
20ms at 115/230VAC
Leakage Current (max)
mA
<0.75mA
100µA at 115VAC 60Hz(2)
Remote Sense
-
Yes
Parallel Connection
-
Yes
Remote On/Off (CNT)
-
Yes
Voltage Programming
(1) -
Yes
DC Good & Fan Fail Signal
-
Yes, open collector output
Auxiliary Output
-
12V 0.1A
LED Indicator
-
Green LED = On
Operating Temperature
°C
-40°C start up. -20 to 74°C, derating linearly to 50% load above 50°C
Storage Temperature
°C
-40 to +85°C
Humidity (non condensing)
-
20 - 90% RH operating, 10 - 95%RH non operating
Cooling
-
Variable speed internal fan
Withstand Voltage(One minute)
- Input to Ground 2kVAC, Input to Output 3kVAC, Input to Ground 2kVAC, Input to Output 4kVAC,
Output to Ground 500VAC, Output to CNT 100VAC Output to Ground 500VAC, Output to CNT 100VAC
Isolation Resistance
-
>50M at 25C & 70%RH, Output to Ground 500VDC
Vibration (non operating)
-
MIL-STD-810F 514.5 Cat. 4,10
Shock (in packaging)
-
MIL-STD-810F 516.5 Procedure I, VI
Immunity
-
EN61000-4-2, -3, -4, -5, -6, -8, -11
Safety Agency Certification
- UL, CSA, EN60950-1, UL60601-1 (1000W only), IEC61010-1 (600W only), EN50178, CE Mark
Conducted & Radiated EMI
-
EN55011 / EN55022-B, FCC Class B
Weight (Typ)
g
1600
2300
Size (WxHxD)
in
2.4 x 4.72 x 7.48”
2.4 x 5.91 x 9.45”
Warranty
yrs
Three Years
(1) 1-6V program voltage input to adjust output 20-120% (typical) of nominal. See instruction manual for details & models with this feature.
(2) Worst case: <300µA at 264VAC, 63Hz (Normal Condition); <500µA (Single Fault Condition).
1-800-526-2324 • www.us.tdk-lambda.com/lp/
99
Disclaimer: us.tdk-lambda.com/lp/legal.htm