LAN9500 Datasheet, PDF (1/66 Pages) SMSC Corporation – USB 2.0 to 10/100 Ethernet Controller Promiscuous mode

LAN9500/LAN9500i
LAN9500A/LAN9500Ai
USB 2.0 to 10/100 Ethernet Controller
PRODUCT FEATURES
Datasheet
Highlights
 Single Chip Hi-Speed USB 2.0 to 10/100 Ethernet
Controller
 Integrated 10/100 Ethernet MAC with Full-Duplex
Support
 Integrated 10/100 Ethernet PHY with HP Auto-MDIX
support
 Integrated USB 2.0 Hi-Speed Device Controller
 Integrated USB 2.0 Hi-Speed PHY
 Implements Reduced Power Operating Modes
Target Applications
 Embedded Systems
 Set-Top Boxes
 PVR’s
 CE Devices
 Networked Printers
 USB Port Replicators
 Standalone USB to Ethernet Dongles
 Test Instrumentation
 Industrial
Key Features
 USB Device Controller
— Fully compliant with Hi-Speed Universal Serial Bus
Specification Revision 2.0
— Supports HS (480 Mbps) and FS (12 Mbps) modes
— Four endpoints supported
— Supports vendor specific commands
— Integrated USB 2.0 PHY
— Remote wakeup supported
 High-Performance 10/100 Ethernet Controller
— Fully compliant with IEEE802.3/802.3u
— Integrated Ethernet MAC and PHY
— 10BASE-T and 100BASE-TX support
— Full- and half-duplex support
— Full- and half-duplex flow control
— Preamble generation and removal
— Automatic 32-bit CRC generation and checking
— Automatic payload padding and pad removal
— Loop-back modes
— TCP/UDP/IP/ICMP checksum offload support
— Flexible address filtering modes
– One 48-bit perfect address
– 64 hash-filtered multicast addresses
– Pass all multicast
– Promiscuous mode
– Inverse filtering
– Pass all incoming with status report
— Wakeup packet support
— Integrated Ethernet PHY
– Auto-negotiation
– Automatic polarity detection and correction
– HP Auto-MDIX support
– Link status change wake-up detection
— Support for 3 status LEDs
— External MII and Turbo MII support HomePNA™ and
HomePlug® PHY
 Power and I/Os
— Various low power modes
— NetDetach feature increases battery life ¹
— Supports PCI-like PME wake ¹
— 11 GPIOs
— Supports bus-powered and self-powered operation
— Integrated power-on reset circuit
— Single external 3.3v I/O supply
– Internal core regulator
 Miscellaneous Features
— EEPROM Controller
— Supports custom operation without EEPROM ¹
— IEEE 1149.1 (JTAG) Boundary Scan
— Requires single 25 MHz crystal
 Software
— Windows XP/Vista Driver
— Linux Driver
— Win CE Driver
— MAC OS Driver
— EEPROM Utility
 Packaging
— 56-pin QFN (8x8 mm) Lead-Free RoHS Compliant
 Environmental
— Commercial Temperature Range (0°C to +70°C)
— Industrial Temperature Range (-40°C to +85°C)
1 _{= LAN9500A/LAN9500Ai only}
SMSC LAN950x Family
DATASHEET
Revision 1.1 (04-18-13)