RL1601CT Datasheet, PDF (1/2 Pages) SEMTECH ELECTRONICS LTD. – GLASS PASSIVATED SILICON RECTIFIERS

RL1601CT THRU RL1607CT
GLASS PASSIVATED SILICON RECTIFIERS
Reverse Voltage – 50 to 1000 Volts
Forward Current – 16.0 Amperes
Features
• Low forward voltage drop
• High current capability
• High capability
• High surge current capability
Mechanical Data
• Case: Molded plastic, TO-220
• Terminals: leads solderable per
• MIL-STD-202, method 208 guaranteed
• Polarity: As marked
• Mounting Position: Any
PIN 1
PIN 1
PIN 1
PIN 3
CASE PIN 3
PIN 2
CASE _{PIN 3}
PIN 2
CASE
PIN 2
POSITIVE CT
NEGATIVE CT
SUFFIX "A"
DOUBLER
SUFFIX "D"
Absolute Maximum Ratings and Characteristics
Dimensions in mm
Ratings at 25^oC ambient temperature unless otherwise specified. Single phase, half wave,60Hz, resistive or
inductive load. For capacitive load, derate current by 20%.
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward Rectified current
0.375”(9.5mm) Lead Length at T_C = 100 ^OC
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC method)
RL
RL
RL
RL
RL
RL
RL
Symbols
Units
1601CT 1602CT 1603CT 1604CT 1605CT 1606CT 1607CT
V_RRM
50 100 200 400 600 800 1000 Volts
V_RMS
35 70 140 280 420 560 700 Volts
V_DC
50 100 200 400 600 800 1000 Volts
I_(AV)
16.0
Amps
I_FSM
150
Amps
Maximum forward voltage
at 8.0A DC and 25℃
Typical junction Capacitance (Note1)
Typical thermal resistance (Note2)
Maximum reverse current at
rated DC blocking voltage
@T_C = 25^OC
@T_C =125 ^OC
Operating and storage temperature range
V_F
C_J
R_0JC
I_R
T_J ,T_s
1.1
50
3.0
10
250
-55 to +150
Volts
pF
℃/W
µAmps
µAmps
O_C
Notes :1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Thermal resistance from junction to case per leg mounted on heatsink.
SEMTECH ELECTRONICS LTD.
(Subsidiary of Semtech International Holdings Limited, acompany
listed on the Hong Kong Stock Exchange, Stock Code: 724)
®
Dated : 18/12/2003