|
SX1701 Datasheet, PDF (1/13 Pages) Semtech Corporation – Highly linear wideband LNA Multi-channel, single-ended to differential conversion | |||
|
ADVANCED COMMUNICATION & SENSING PRODUCTS
SX1701
SX1701 â Datasheet
Highly linear wideband LNA
Multi-channel, single-ended to differential conversion
GENERAL DESCRIPTION
The SX1701 is an integrated LNA operating over a wide
frequency range from 40 MHz to 2.5 GHz. It is optimized
for high OIP2 and OIP3 with minimum current
consumption. It also performs a single-ended to
differential conversion.
Three independent output channels are available and the
gain of each may be adjusted independently.
APPLICATIONS
⢠Digital Set Top Boxes (Satellite and Terrestrial)
⢠CATV Distribution Systems
⢠Active Splitter
⢠Data Communications Systems
⢠Active Balun
TYPICAL APPLICATION
KEY PRODUCT FEATURES
⢠Single-ended input / Triple differential outputs
⢠Independent programmable gain for each channel: 6,
12 and 18 dB
⢠High Linearity: OIP2 of 57 dBm and OIP3 of 22 dBm
⢠Noise Figure of 7 dB
⢠75 ⦠Input impedance
⢠100 ⦠differential output impedance
⢠Current consumption of 130 mA with one channel
enabled
⢠ESD protection (Normal ESD handling procedures
should be observed)
⢠Very small package: MLPQ-16, 4 mm x 4 mm
(equivalent to QFN-16, 4 mm x 4 mm)
ORDERING INFORMATION
Part number
Temperature range
Package
SX1701I085TRT -40 °C to +85 °C
Lead Free
MLPQ-16
Note: This device is WEEE and RoHS compliant.
RF IN
+ 5.0 V
SX1701
VDD2
VDD1
GND
IN
DEC
G3(1:0)
OUTP3
OUTM3
G2(1:0)
OUTP2
OUTM2
G1(1:0)
OUTP1
OUTM1
Silicon Tuner
TV
Tuner
PIP
Tuner
DVR
Tuner
V1.11_STD â August 20th, 2008
Gain control
1/13
www.semtech.com
|
▷ |