LB11692JH Datasheet, PDF (1/12 Pages) Sanyo Semicon Device – Monolithic Digital IC 24V Fan Motor Driver IC

Ordering number : ENA0333A
LB11692JH ^{Monolithic Digital IC}
24V Fan Motor Driver IC
Overview
The LB11692JH is a three-phase brushless motor driver IC that uses a direct PWM drive technique to achieve highly
efficient drive. It is optimal for driving fuel pump motors and other miniature motors.
Functions
• Direct PWM drive
• PWM control based on both a DC voltage input (the CTL voltage) and a pulse input
• Provides a 5V regulator output
• One Hall-effect sensor FG output
• Start/stop switching circuit (Stop mode includes a power saving function.)
• Built-in integrating amplifier
• Automatic recovery constraint protection circuit (on/off = 1/14), RD output
• Built-in current limiter circuit
• Built-in LVSD circuit
• Built-in thermal protection circuit
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Supply voltage range
Output current
Allowable power dissipation 1
VCC max
IO max
Pd max1
T ≤ 500ms
Independent IC
Allowable power dissipation 2
Pd max2
Mounted on a specifed board*
Operating temperature
Topr
Storage temperature
Tstg
* Mounted on a specified board: 114.3mm×76.1mm×1.6mm, glass epoxy
Ratings
Unit
30
V
1.8
A
0.9
W
2.1
W
-40 to +85
°C
-55 to +150
°C
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
D1306 MS IM 20060404-S00005 No.A0333-1/12