|
RL78-G11 Datasheet, PDF (1/139 Pages) Renesas Technology Corp – True Low Power Platform | |||
|
Datasheet
RL78/G11
RENESAS MCU
R01DS0282EJ0110
Rev. 1.10
Dec 28, 2016
True Low Power Platform (as low as 58.3 ïA/MHz, and 0.64 ïA for LVD), 1.6 V to 5.5 V operation, 16
Kbyte Flash, 33 DMIPS at 24 MHz, for General Purpose Applications
1. OUTLINE
1.1 Features
Ultra-low power consumption technology
⢠VDD = 1.6 V to 5.5 V
⢠HALT mode
⢠STOP mode
⢠SNOOZE mode
RL78 CPU core
⢠CISC architecture with 3-stage pipeline
⢠Minimum instruction execution time: Can be
changed from high speed (0.04167 ïs: @ 24 MHz
operation with high-speed on-chip oscillator) to
ultra-low speed (66.6 ïs: @ 15 kHz operation with
low-speed on-chip oscillator clock)
⢠Multiply/divide/multiply & accumulate instructions
are supported.
⢠Address space: 1 Mbytes
⢠General-purpose registers: (8-bit register ï´ 8) ï´ 4
banks
⢠On-chip RAM: 1.5 Kbytes
Code flash memory
⢠Code flash memory: 16 Kbytes
⢠Block size: 1 Kbytes
⢠On-chip debug function
⢠Self-programming (with boot swap function/flash
shield window function)
Data flash memory
⢠Data flash memory: 2 Kbytes
⢠Back ground operation (BGO): Instructions can be
executed from the program memory while
rewriting the data flash memory.
⢠Number of rewrites: 1,000,000 times (TYP.)
⢠Voltage of rewrites: VDD = 1.8 to 5.5 V
High-speed on-chip oscillator
⢠Select from 48 MHz, 24 MHz, 16 MHz, 12 MHz, 8
MHz, 6 MHz, 4 MHz, 3 MHz, 2 MHz, and 1 MHz
⢠High accuracy: ±1.0% (VDD = 1.8 to 5.5 V, TA = -
20 to +85°C)
Middle-speed on-chip oscillator
⢠Selectable from 4 MHz, 2 MHz, and 1 MHz.
Operating ambient temperature
⢠TA = -40 to +85°C (A: Consumer applications)
⢠TA = -40 to +105°C (G: Industrial applications)
Power management and reset function
⢠On-chip power-on-reset (POR) circuit
⢠On-chip voltage detector (LVD) (Select interrupt
and reset from 14 levels)
Data transfer controller (DTC)
⢠Transfer modes: Normal transfer mode, repeat
transfer mode, block transfer mode
⢠Activation sources: Activated by interrupt sources.
⢠Chain transfer function
Event link controller (ELC)
⢠Event signals of 18 types can be linked to the
specified peripheral function.
Serial interfaces
⢠CSI: 4 channels
⢠UART: 2 channel
⢠I2C/simplified I2C: 4 channels
⢠Multimaster I2C: 2 channels
Timers
⢠16-bit timer (TAU): 4 channels
⢠TKB: 1 channel
⢠12-bit interval timer: 1 channel
⢠8-bit interval timer: 2 channels
⢠Watchdog timer: 1 channel
R01DS0282EJ0110 Rev. 1.10
Dec 28, 2016
Page 1 of 135
|
▷ |