NK6TMEI Datasheet, PDF (1/2 Pages) PANDUIT CORP. – NetKey Category 6 UTP Jack Modules

NetKey^® Category 6 UTP Jack Modules
DATA SHEET
Category 6/Class E 8-position keystone UTP jack module
shall terminate unshielded twisted 4-pair, 22-26 AWG,
100 ohm cable without the use of a punchdown tool.
Optional tool ensures conductors are fully terminated.
Universal label shall be color-coded to T568A and
T568B wiring schemes.
technical information
Category 6/Class E
channel performance:
Meets all ANSI/TIA-568.C2 Category 6 and ISO 11801 2nd
Edition Class E channel standard requirements at swept
frequencies up to 250 MHz
FCC compliance:
Meets ANSI/TIA-1096-A; contacts plated with 50 microinches
of gold for superior performance
IEC compliance:
Meets IEC 60603-7
PoE compliance:
UL rated:
RoHS compliance:
Meets requirements of IEEE 802.3af and IEEE 802.3at for
PoE applications
UL 1863 approved
Compliant
key features and benefits
100% performance tested
Confidence that each jack module delivers
specified performance
Termination cap
Provides strain relief, helps control cable end radius and
securely retains wires in place
Does not require
punchdown tool
Modular
Individually serialized
Can terminate with optional termination tool
Universal keystone jack modules snap in and out of all
NetKey^® Faceplates, Modular Patch Panels, and Surface
Mount Boxes for fast moves, adds, and changes
Marked with quality control number for future traceability
NetKey ^® Network Components
NetKey ^® Category 6 UTP
Jack Modules
Module:
NK6TMIW*
NetKey ^® Category 6 UTP
Patch Cords
Foot lengths:
NK6PC3**Y
Meter lengths: NK6PC1M^Y
NetKey ^® Molded Modular
Patch Panels
24-port, 1 RU:
NKPP24P
48-port, 2 RU:
NKPP48P
Termination and Cable
Prep Tools (optional)
Termination
tool:
CGJT
Wire
snipping tool:
CWST
Wire
stripping tool:
CJAST
*To designate color other than IW (Off White),
replace IW suffix with WH (White),
EI (Electric Ivory), IG (International Gray),
BL (Black), BU (Blue), RD (Red), YL (Yellow),
GR (Green), OR (Orange), or VL (Violet).
**For standard lengths other than 3 feet
(5, 7, 10, 14 or 20) change the length
designation in part number to the desired
length. For standard colors other than
Off White, add suffix BL (Black), BU (Blue),
RD (Red), YL (Yellow), GR (Green),
OR (Orange), or VL (Violet) before Y in
the part number. For example, the part
number of a blue, Category 6, 5-foot patch
cord is NK6PC5BUY.
^For standard lengths other than 1 meter
(0.5, 2, 3, 4, 5) change the length designation
in part number to the desired length. For
standard colors other than Off White, add
suffix BL (Black), BU (Blue), RD (Red),
YL (Yellow), GR (Green), OR (Orange),
VL (Violet) or GY (Gray) before Y in the part
number. For example, the part number for a
blue 5 meter patch cord is NK6PC5MBUY.
applications
Applications include:
• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet)
• 155 Mb/s ATM, 622 Mb/s ATM,1.2 Gb/s ATM
• Token Ring 4/16
• Voice over internet protocol (VoIP)
www.panduit.com