NLAS7223C Datasheet, PDF (1/9 Pages) ON Semiconductor – High-Speed USB 2.0 (480 Mbps) DPDT Switches

NLAS7223C
High-Speed USB 2.0
(480 Mbps) DPDT Switches
The NLAS7223C DPDT switch is optimized for high−speed USB
2.0 applications within portable systems. It features ultra−low on
capacitance, C_ON = 7.5 pF (typ), and a bandwidth above 900 MHz. It
is optimized for applications that use a single USB interface connector
to route multiple signal types. The C_ON and R_ON of both channels are
suitably low to allow the NLAS7223C to pass any speed USB data or
audio signals going to a moderately resistive terminal such as an
external headset. It is offered in a UQFN10 1.4 mm x 1.8 mm package.
Features
• Optimized Flow−Through Pinout on NLAS7223C
• R_ON: 7.5 W Typ @ V_CC = 4.2 V
• C_ON: 7.5 pF Typ @ V_CC = 3.3 V
• V_CC Range: 1.65 V to 4.5 V
• Typical Bandwidth: 900 MHz
• 1.4 mm x 1.8 mm x 0.50 mm UQFN10
• OVT on Common Signal Pins D+/D− up to 5.25 V
• 8 kV ESD Protection on D+/D− to GND
• This is a Pb−Free Device
Typical Applications
• High Speed USB 2.0 Data
• Mobile Phones
• Portable Devices
http://onsemi.com
MARKING
DIAGRAM
UQFN10
AC MG
CASE 488AT
G
1
AC = Device Code
M = Date Code
G
= Pb−Free Device
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
NLAS7223C
HS
USB
XCVR
FS USB
XCVR or
AUDIO
AMP
Figure 1. Application Diagram
© Semiconductor Components Industries, LLC, 2008
1
October, 2008 − Rev. 1
Publication Order Number:
NLAS7223C/D