NLAS7222A Datasheet, PDF (1/10 Pages) ON Semiconductor – 3.3 V, Wide Bandwidth, 2− to −1−Port (DPDT) Switch with Enable

NLAS7222A
3.3 V, Wide Bandwidth,
2− to −1−Port (DPDT) Switch
with Enable
ON Semiconductor’s NLAS7222A series of analog switch circuits
are produced using the company’s advanced sub−micron CMOS
technology, achieving industry−leading performance.
The NLAS7222A is a 2− to 1−port analog switch. Its wide
bandwidth and low bit−to−bit skew allow it to pass high−speed
differential signals with good signal integrity. The switch is
bidirectional and offers little or no attenuation of the high−speed
signals at the outputs. Industry−leading advantages include a
propagation delay of less than 250 ps, resulting from its low channel
resistance and low I/O capacitance. Its high channel−to−channel
crosstalk rejection results in minimal noise interference. Its bandwidth
is wide enough to pass High−Speed USB 2.0 differential signals
(480 Mb/s).
Features
• R_ON is Typically 6.5 W at V_CC = 3 V
• Low Bit−to−Bit Skew: Typically 50 ps
• OVT on D+ and D− up to 3.6 V
• Power OFF Protection:
When V_CC = 0 V, D+ and D− Can Tolerate up to 3.6 V
• Low Crosstalk: −45 dB @ 250 MHz
• Low Current Consumption: 1 mA
• Near−Zero Propagation Delay: 250 ps
• Channel On−Capacitance: 6.5 pF (Typical)
• V_CC Operating Range: +3.0 V to +3.6 V
• > 720 MHz Bandwidth (or Data Frequency)
• This is a Pb−Free Device
Typical Applications
• Differential Signal Data Routing
• USB 2.0 Signal Routing
Important Information
• Continuous Current Rating Through Each Switch ±50 mA
http://onsemi.com
1
XX
M
G
MARKING
DIAGRAM
WQFN−10
CASE 488AQ
XX M
G
= Specific Device Code
= Date Code
= Pb−Free Device
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
October, 2006 − Rev. 0
Publication Order Number:
NLAS7222A/D