NLAS7213_14 Datasheet, PDF (1/9 Pages) ON Semiconductor – High-Speed USB 2.0 DPST Switch

NLAS7213
High-Speed USB 2.0
(480 Mbps) DPST Switch
The NLAS7213 is a DPST switch optimized for high−speed USB
2.0 applications within portable systems. It features ultra−low off
capacitance, C_OFF = 3.0 pF (typ), and a bandwidth above 1118 MHz. It
is optimized for applications that use a single USB interface connector
to route multiple signal types. The C_ON and R_ON of both switches are
suitably low to allow the NLAS7213 to pass any speed USB data or
audio signals going to a moderately resistive terminal such as an
external headset.
The NLAS7213 is protected on all pins with 8 kV
Human Body Model ESD protection. It is offered in a 1.5 x 1.5 mm
UQFN8 package.
Features
• R_ON: 8.5 W Max @ V_CC = 3.3 V
• C_OFF: 3.0 pF Typ @ V_CC = 3.3 V
• V_CC Operating Range: 1.65 V to 4.5 V
• > 1118 MHz Bandwidth
• OVT up to 5.25 V on D+/D− Pins
• 1.5 x 1.5 x 0.55 mm UQFN8
• 8 kV ESD Protection on All Pins
• This is a Pb−Free Device
Typical Applications
• High Speed USB 2.0 Data
• Mobile Phones
• Portable Devices
NLAS7213
FS USB
XCVR or
AUDIO
AMP
www.onsemi.com
18
UQFN8
(1.5 x 1.5 mm)
CASE 523AH
MARKING
DIAGRAM
1
AA MG
G
AA = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
Figure 1. Application Diagram
HS
USB
XCVR
© Semiconductor Components Industries, LLC, 2014
1
November, 2014 − Rev. 5
Publication Order Number:
NLAS7213/D