|
NLAS4051S Datasheet, PDF (1/11 Pages) ON Semiconductor – Analog Multiplexer/ Demultiplexer | |||
|
NLAS4051S
Analog Multiplexer/
Demultiplexer
TTL Compatible, SingleâPole, 8âPosition
Plus Common Off
The NLAS4051S is an improved version of the MC14051 and
MC74HC4051 fabricated in subâmicron Silicon Gate CMOS
technology for lower RDS(on) resistance and improved linearity with
low current. This device may be operated either with a single supply or
dual supply up to ±3.0 V to pass a 6.0 VPP signal without coupling
capacitors.
When operating in single supply mode, it is only necessary to tie
VEE, pin 7 to ground. For dual supply operation, VEE is tied to a
negative voltage, not to exceed maximum ratings.
Features
⢠Improved RDS(on) Specifications
⢠Pin for Pin Replacement for MAX4051 and MAX4051A
⦠One Half the Resistance Operating at 5.0 V
⢠Single or Dual Supply Operation
⦠Single 2.5â5.0 V Operation, or Dual ±3.0 V Operation
⦠With VCC of 3.0 to 3.3 V, Device Can Interface with 1.8 V
Logic, No Translators Needed
⦠Address and Inhibit Logic are OverâVoltage Tolerant and May
Be Driven Up +6.0 V Regardless of VCC
⢠Improved Linearity Over Standard HC4051 Devices
⢠Space Saving TSSOP Package
⢠This is a PbâFree Device
VCC NO2 NO4 NO0 NO6 ADDC ADDB ADDA
16 15 14 13 12 11 10 9
http://onsemi.com
MARKING
DIAGRAM
16
1
TSSOPâ16
DT SUFFIX
CASE 948F
16
NLAS
4051
ALYWG
G
1
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= PbâFree Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shippingâ
NLAS4051SDTR2G TSSOPâ16 2500/Tape & Reel
(PbâFree)
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
1
NO1
2
3
4
5
6
7
8
NO3 COM NO7 NO5 Inhibit VEE GND
Figure 1. Pin Connection
(Top View)
© Semiconductor Components Industries, LLC, 2008
1
May, 2008 â Rev. 0
Publication Order Number:
NLAS4051S/D
|
▷ |