NLAS325_06 Datasheet, PDF (1/10 Pages) ON Semiconductor – Dual SPST Analog Switch, Low Voltage, Single Supply

NLAS325
Dual SPST Analog Switch,
Low Voltage, Single Supply
The NLAS325 is a dual SPST (Single Pole, Single Throw) switch,
similar to 1/2 a standard 4066. The device permits the independent
selection of 2 analog/digital signals. Available in the Ultra−Small 8
package.
The use of advanced 0.6 m CMOS process, improves the R_ON
resistance considerably compared to older higher voltage
technologies.
Features
• On Resistance is 20 W Typical at 5.0 V
• Matching is < 1.0 W Between Sections
• 2.0−6.0 V Operating Range
• Ultra Low < 5.0 pC Charge Injection
• Ultra Low Leakage < 1.0 nA at 5.0 V, 25°C
• Wide Bandwidth > 200 MHz, −3.0 dB
• 2000 V ESD (HBM)
• R_ON Flatness "6.0 W at 5.0 V
• US8 Package
• Independent Enables; One Positive, One Negative
• Pb−Free Package is Available
NO1 1
COM1 2
IN2 3
GND 4
Figure 1. Pinout
8 V_CC
7 IN1
6 COM2
5 NC2
http://onsemi.com
MARKING
DIAGRAM
8
8
1
US8
US SUFFIX
CASE 493
A9 M G
G
1
A9
= Device Code
M
= Date Code*
G
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary depending upon
manufacturing location.
PIN ASSIGNMENT
1
NO1
2
COM1
3
IN2
4
GND
5
NC2
6
COM2
7
IN1
8
V_CC
FUNCTION TABLE
On/Off
Enable Input
Analog
Switch 1
Analog
Switch 2
L
Off
On
H
On
Off
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
April, 2006 − Rev. 6
Publication Order Number:
NLAS325/D