NL3S22S Datasheet, PDF (1/9 Pages) ON Semiconductor – USB 2.0 + Audio Switch

NL3S22S
USB 2.0 + Audio Switch
The NL3S22S is a double−pole/double−throw (DPDT) analog
switch for routing high speed differential data and audio. The
high−speed data path is compliant with High Speed USB 2.0, Full
Speed USB 1.1, Low Speed USB 1.0 and any generic UART protocol.
The multi−purpose audio path is capable of passing signals with
negative voltages as low as 2 V below ground and features shunt
resistors to reduce Pop and Click noise in the audio system.
Features
• V_CC Range: 2.7 V to 5.5 V
• Control Pins Compatible with 1.8 V Interfaces
• I_CC: 23 mA (Typ)
• ESD Performance: 4 kV HBM
• Available in1.4 mm x 1.8 mm UQFN10
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
High Speed Data Path
• Input Signal Range: 0 V to 3.7 V
• R_DS(on): 5 W (Typ)
• C_ON: 4.5 pF (Typ)
• Data Rate: USB 2.0–Compliant – up to 480 Mbps
Audio Path
• Input Signal Range: −2.0 V to 2.0 V
• R_DSON: 3 W (Typ)
• R_ON(FLAT): 0.002 W (Typ)
• THD: 0.002% (R_L = 16 W / V_IS = 0.4 V_RMS)
Applications
• Smartphones
• Tablets
• USB 2.0 Hosts/Peripherals
• Audio / High−Speeds Data Switching
www.onsemi.com
MARKING
DIAGRAM
UQFN10
AW MG
CASE 488AT
G
1
AW = Device Code
M = Date Code
G
= Pb−Free Device
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package Shipping^†
NL3S22SMUTAG
UQFN10 3000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2016
1
October, 2016 − Rev. 0
Publication Order Number:
NL3S22S/D