NL3S2223 Datasheet, PDF (1/10 Pages) ON Semiconductor – High-Speed USB 2.0 (480 Mbps) DPDT Switches

NL3S2223
Product Preview
High-Speed USB 2.0
(480 Mbps) DPDT Switches
The NL3S2223 is a DPDT switch optimized for high−speed
USB 2.0 applications within portable systems. It features ultra−low on
capacitance, C_ON = 5.5 pF (typ), and a bandwidth above 950 MHz. It
is optimized for applications that use a single USB interface connector
to route multiple signal types. The C_ON and R_ON of both channels are
suitably low to allow the NL3S2223 to pass any speed USB data or
audio signals going to a moderately resistive terminal such as an
external headset. The device is offered in a UQFN10 1.4 mm x 1.8 mm
package.
Features
• Optimized Flow−Through Pinout
• R_ON: 5.0 W Typ @ V_CC = 4.2 V
• C_ON: 5.5 pF Typ @ V_CC = 3.3 V
• V_CC Range: 1.65 V to 4.5 V
• Typical Bandwidth: 950 MHz
• 1.4 mm x 1.8 mm x 0.50 mm UQFN10
• OVT on Common Signal Pins D+/D− up to 5.25 V
• 8 kV HBM ESD Protection on All Pins
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
• High Speed USB 2.0 Data
• Mobile Phones
• Portable Devices
www.onsemi.com
MARKING
DIAGRAM
UQFN10
U3 MG
CASE 488AT
G
1
U3 = Device Code
M = Date Code
G
= Pb−Free Device
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package Shipping^†
NL3S2223MUTBG
UQFN10 3000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
NL3S2223
HS
USB
XCVR
FS USB
XCVR or
AUDIO
AMP
Figure 1. Application Diagram
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
© Semiconductor Components Industries, LLC, 2016
1
August, 2016 − Rev. P0
Publication Order Number:
NL3S2223/D