NL27WZ14 Datasheet, PDF (1/8 Pages) ON Semiconductor – Dual Schmitt-Trigger Inverter

NL27WZ14
Dual Schmitt−Trigger Inverter
The NL27WZ14 is a high performance dual inverter with
Schmitt- Trigger inputs operating from a 1.65 to 5.5 V supply.
Pin configuration and function are the same as the NL27WZ04, but the
inputs have hysteresis and, with its Schmitt trigger function, the
NL27WZ14 can be used as a line receiver which will receive slow input
signals. The NL27WZ14 is capable of transforming slowly changing input
signals into sharply defined, jitter- free output signals. In addition, it has a
greater noise margin than conventional inverters. The NL27WZ14 has
hysteresis between the positive- going and the negative- going input
thresholds (typically 1.0 V) which is determined internally by transistor
ratios and is essentially insensitive to temperature and supply voltage
variations.
• Designed for 1.65 V to 5.5 V V_CC Operation
• Over Voltage Tolerant Inputs and Outputs
• LVTTL Compatible - Interface Capability with 5 V TTL Logic
with V_CC = 3 V
• LVCMOS Compatible
• 24 mA Balanced Output Sink and Source Capability
• Near Zero Static Supply Current Substantially Reduces System
Power Requirements
• Current Drive Capability is 24 mA at the Outputs
• Chip Complexity: FET = 72
IN A1 ¹
6 OUT Y1
GND ²
5 V_CC
IN A2 3
4 _{OUT Y2}
Figure 1. Pinout (Top View)
IN A1
IN A2
OUT Y1
OUT Y2
Figure 2. Logic Symbol
http://onsemi.com
6
1
SC-88/SOT-363/SC70-6
DF SUFFIX
CASE 419B
MARKING
DIAGRAMS
6
MA^d
1
6
1
TSOP-6/SOT-23-6/SC59-6
DT SUFFIX
CASE 318G
6
MA^d
1
MA = Device Marking
d = Date Code
PIN ASSIGNMENT
Pin
1
2
3
4
5
6
Function
IN A1
GND
IN A2
OUT Y2
V_CC
OUT Y1
FUNCTION TABLE
A Input
L
H
Y Output
H
L
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
© Semiconductor Components Industries, LLC, 2003
1
May, 2003 - Rev. 4
Publication Order Number:
NL27WZ14/D