LQH31CN1R0M03L Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Coils for Choke Wire Wound Type

Coils/Inductors/Microchip Transformer > Chip Coils > for Choke Wire Wound Type
Data Sheet
1
Chip Coils for Choke Wire Wound Type
LQH31C Series (1206 Size)
I Dimension
2.3±0.2
1.6±0.2
I Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
Minimum Quantity
2000
7500
3.2±0.3
1.6±0.2
0.7min. 0.7min. 0.7min.
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance Test Frequency
LQH31CNR12M03p
0.12µH±20%
LQH31CNR22M03p
0.22µH±20%
LQH31CNR47M03p
0.47µH±20%
LQH31CN1R0M03p
1.0µH±20%
LQH31CN2R2M03p
2.2µH±20%
LQH31CN4R7M03p
4.7µH±20%
LQH31CN100K03p
10µH±10%
LQH31CN220K03p
22µH±10%
LQH31CN470K03p
47µH±10%
LQH31CN101K03p
100µH±10%
Operating Temperature Range: -40°C to +85°C
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
Rated Current
970mA
850mA
700mA
510mA
430mA
340mA
230mA
160mA
100mA
80mA
DC Resistance
0.08ohm±40%
0.1ohm±40%
0.15ohm±40%
0.28ohm±30%
0.41ohm±30%
0.65ohm±30%
1.3ohm±30%
3.0ohm±30%
8.0ohm±30%
12ohm±30%
Self Resonance Frequency (min.)
250MHz
250MHz
180MHz
100MHz
50MHz
31MHz
20MHz
14MHz
10MHz
7MHz
Continued on the following page.
o This data sheet is applied for CHIP COIL used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2007.9.6
http://www.murata.com/