NL126 Datasheet, PDF (1/3 Pages) Meder Electronic – Reed Switch

Product Solutions
A Global Leader in the Design, Development, and
Manufacture of Sensors and Magnetic Components
wwwwww..ssttaannddeexxmmeeddeerr..ccoomm
NL126 Reed Switch
REACH & RoHS Compliant
Contact Information:
Standex-Meder Electronics
World Headquarters
4538 Camberwell Road
Cincinnati, OH 45209 USA
Standex Americas (OH)
+1.866.STANDEX
(+1.866.782.6339)
[e-mail]
Meder Americas (MA)
+1.800.870.5385
[e-mail]
Standex-Meder Asia (Shanghai)
+86.21.37820625
[e-mail]
Standex-Meder Europe (Germany)
+49.7731.8399.0
[e-mail]
Professional grade general-purpose miniature reed switch with rhodium contacts
Designed to give superior life switching relatively heavy loads
Normal applications include test equipment, instrumentation, liquid level sensing and
incandescent lamp switching
Physical Characteristics
A Glass Length (Max.)
B Overall Length (Max.)
C Glass Diameter (Max.)
D Lead Diameter (Nom.)
20.3 mm
54.0 mm
2.5 mm
0.7 mm
Electrical Characteristics
Contact Arrangement
Form A (SPST), Center Gap
Contact Material
Power Rating ¹
Rhodium
50VA maximum
Switching Current (Max.)
1.5 Amp. DC, 1.5 Amp. AC
Carry Current (Max.)
2.5 Amp. DC, 2.5 Amp. AC
Switching Voltage (Max.)
Breakdown Voltage (Min. @20AT) ²
Contact Resistance ³
Insulation Resistance (Min.)
200 VDC, 150 VAC
250 Volts DC
100 Milliohms
10¹² ohms
Contact Capacitance (pf Max.)
0.3 pf
1. The specification for VA rating may sometimes be exceeded for less sensitive (higher AT) switches, and should be
decreased for very sensitive (lower AT) switches. Standex-Meder Electronics will run life tests specific to a customer’s
load upon request.
2. Breakdown voltage is measured in the presence of a radioactive ionising source. Switch leakage current is limited to
100 microamperes
3. Contact resistance measurements are made at 10ma from a 1-volt source, with 50% overdrive, using a 4-wire (Kelvin)
measuring system. Contact probes are located on 43 mm centres.
Minimum Switching Life with Standard Test Loads, using 20AT switch
Voltage 5 VDC 10 VDC 12 VDC 12 VDC 24 VDC 50 VDC 100 VAC
Current 2 mA 1 A 10 mA
3 A 10 mA 1 A 100 mA
Life
1 x 10⁹ 3 x 10⁶ 500 x 10⁶ 50 x 10³ 10 x 10⁶ 3 x 10⁶ 3 x 10⁶
Note: End of life is defined as contact resistance exceeding one ohm and/or failure to operate.
150 VAC
200 mA
0.5 x 10⁶