RKP-CMU1_12 Datasheet, PDF (1/7 Pages) Mean Well Enterprises Co., Ltd. – 1U Rack Control and Monitoring Unit

1U Rack Control and Monitoring Unit
RKP-CMU1
Description :
RKP-CMU1 is a fully digitalized control / monitoring unit for the
RCP-2000 power system. Equipped with USB, RS-232, and ethernet
interface, it can be connected locally to PC to execute the control
and monitoring tasks. With built-in 4 configurable relay contacts,
users can flexibility monitor specific events or alarms and react
suitable action accordingly.
SELECTION GUIDE
Single unit: RKP-CMU1
Rack: RKP-1U I -CMU1
I: AC Inlet (IEC320-C20)
T: Terminal block
Features :
1U low profile/19-inch rack mounting
Control and monitor up to 32 RCP-2000 units
Front panel LCD and buttons for on-site service without PC
USB-, RS-232 or Ethernet interface for PC connection locally or remote
monitoring and control via GSM modem
Alarm/event log with time and date
Windows-based PC communication software
Easy wire connections on rear side
4 user programmable relay outputs for traditional remote monitoring or
warning
3 years warranty
SPECIFICATION
MODEL
RKP-1U -CMU1
RKP-CMU1
DIGITAL METER
Display the DC output voltage, current, and internal temperature of each RCP-2000 unit
OUTPUT ^{CONTROL OUTPUT}
LED INDICATOR
PM Bus signal for each RCP-2000 unit
Green: Power on Red:Alarm
RELAY CONTACT
4 user programmable relay, relay contact rating(max.): 30V/1A resistive
VOLTAGE RANGE Note.3 12 ~ 15VDC
INPUT CURRENT
1A/12VDC 0.8A/15VDC
MONITORING INPUTS
PM Bus signal for each RCP-2000 unit
DISPLAY
LCD 16x2 Alphanumeric Matrix Display / PC Web Page Display
MONITOR
FUNCTION _CONTROL
Output Voltage / Load Current / Temperature / Input Voltage
Output Voltage, Current Limit, ON/OFF
COMM. INTERFACE
USB, RS-232, Ethernet
WORKING TEMP.
Note.1 -25 ~ +70
ENVIRONMENT ^{WORKING HUMIDITY}
20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY &
EMC
SAFETY STANDARDS
UL60950-1, TUV EN60950-1 approved
Design refer to TUV EN60950-1
WITHSTAND VOLTAGE Note.2 I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.7KVDC
O/P-FG:0.7KVDC
ISOLATION RESISTANCE Note.2 I/P-O/P, I/P-FG,O/P-FG:100M Ohms / 500VDC / 25 / 70% RH O/P-FG:100M Ohms / 500VDC / 25
EMC EMISSION
Compliance to EN55022 (CISPR22) Conduction Class B, Radiation Class A ; EN61000-3-2,-3
/ 70% RH
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-1(EN50082-2), light industry level, criteria A
OTHERS
NOTE
MTBF
110.5K hrs min. MIL-HDBK-217F (25 )
DIMENSION
486.6*350.8*44mm (L*W*H)
147.5*127*41mm (L*W*H)
PACKING
4.4Kg; 3pcs/14.2Kg/2.67CUFT
0.8Kg; 16pcs/13.8Kg/0.79CUFT
1. LCD may freeze under -10 .
2. SK100 and all of signal connectors (except CN502, CN503, and USB port) are considered as O/P.
3. Recommanded use MEAN WELL power adaptor series: GS12, GS15, GS18, GE12, GE18.
File Name:RKP-CMU1-SPEC 2012-03-20