X24C02 Datasheet, PDF (8/16 Pages) Xicor Inc. – Serial E2PROM

X24C02
Sequential Read
Sequential Read can be initiated as either a current
address read or random access read. The first word is
transmitted as with the other modes, however, the
master now responds with an acknowledge, indicating it
requires additional data. The X24C02 continues to output
data for each acknowledge received. The master
terminates this transmission by issuing a stop condition,
omitting the ninth clock cycle acknowledge.
Figure 9. Sequential Read
The data output is sequential, with the data from address
and followed by the data from n + 1. The address counter
for read operations increments all address bits, allowing the
entire memory contents to be serially read during
one operation. At the end of the address space (address 255),
the counter “rolls over” to address 0 and the
X24C02 continues to output data for each acknowledge
received. Refer to Figure 9 for the address, acknowledge
and data transfer sequence.
BUS ACTIVITY:
MASTER
SLAVE
ADDRESS
SDA LINE
A
BUS ACTIVITY:
C
X24C02
K
DATA n
A
A
A
C
C
C
K
K
K
DATA n+1
DATA n+2
Figure 10. Typical System Configuration
S
T
O
P
P
DATA n+x
3838 FHD F15
V
CC
SDA
SCL
MASTER
TRANSMITTER/
RECEIVER
SLAVE
RECEIVER
SLAVE
TRANSMITTER/
RECEIVER
MASTER
TRANSMITTER
MASTER
TRANSMITTER/
RECEIVER
3838 FHD F16
8