RL201 Datasheet, PDF (1/2 Pages) Wing Shing Computer Components – SILICON RECTIFIER(VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

RL201 THRU RL207
GENERAL PURPOSE
PLASTIC RECTIFIER
VOLTAGE:50 TO 1000V
CURRENT; 2.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
DO-15\DO-201AC
MECHANICAL DATA
Terminal:Plated axial leads solderable per
MIL-STD 202E, method 208C
Case:Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity:color band denotes cathode
Mounting position:any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL RL RL RL RL RL RL RL units
201 202 203 204 205 206 207
Maximum Recurrent Peak Reverse Voltage
Vrrm 50 100 _{200 400 600 800 1000 V}
Maximum RMS Voltage
Vrms
35 70 _{140 280 420 560 700}
V
Maximum DC blocking Voltage
Vdc
50 100 _{200 400 600 800 1000 V}
Maximum Average Forward Rectified
If(av)
2.0
Current 3/8”lead length at Ta =75°C
A
Peak Forward Surge Current 8.3ms single
Ifsm
Half sine-wave superimposed on rated load
70.0
A
Maximum Instantaneous Forward Voltage at
Vf
rated forward current
1.1
V
Maximum full load reverse current
full cycle at T_L =75°C
Ir(av)
30.0
µA
Maximum DC Reverse Current Ta =25°C
Ir
at rated DC blocking voltage Ta =100°C
5.0
µA
100.0
µA
Typical Junction Capacitance
(Note 1)
Cj
20.0
pF
Typical Thermal Resistance
(Note 2)
R(ja)
40.0
°C/W
Storage and Operation Junction Temperature Tstg
-50 to +150
°C
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted
Rev.A4
www.gulfsemi.com