FF0200M Datasheet, PDF (1/2 Pages) Faraday Technology – LOW PASS VIDEO FILTER

FF….M SERIES
LOW PASS VIDEO FILTER
STEEPNESS FACTOR 1.14
This range of Elliptical Function Low Pass filters is intended for bandwidth limitation where a fast rate of cut off is
required. It is especially useful in removing sound sub-carriers from a video signal while maintaining essential
bandwidth. The filters are corrected for group delay distortion over 85% of the passband and for loss distortion over
the entire passband. Degradation of a composite video signal is minimal when a 4.5 MHz or 5.5 MHz filter is selected
for a 525 or 625 line T.V. system.
Order Code
FF0200M*
FF0250M*
FF0300M*
FF0350M*
FF0400M*
FF0450M*
FF0500M*
FF0550M*
FF0580M*
FF0600M*
FF0650M*
FF0700M*
FF0750M*
FF0800M*
FF0850M*
FF0900M*
FF0950M*
FF1000M*
End of Passband
MHz
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
5.80
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
Start of Stopband
MHz
2.28
2.85
3.42
3.99
4.56
5.13
5.70
6.27
6.60
6.84
7.41
7.98
8.55
9.12
9.69
10.26
10.83
11.40
Group Delay Ripple
ns
40
30
25
25
20
20
15
15
15
15
12
12
10
10
10
10
10
10
Delay Time
ns
1307
1047
874
749
655
582
523
476
452
436
403
374
349
327
308
291
275
262
* insert suffix ‘D’ for DIP package eg FF0500MD
suffix ‘B’ for BNC package eg FF0500MB
DR00020B
DR00029A
Other data
Impedance
75 ohms
Insertion Loss
< 2.0 dB
Stopband attenuation wrt 100 kHz
> 40 dB
Amplitude ripple in passband
< 0.3 dB
Video performance for filters of 5.5 MHz (4.5 MHz for 525 line) and above.
Pulse and bar: K - rating
< 1.0 %
Luminance/Chrominance Gain inequality (20T)
< 1.5 %
Luminance/Chrominance Delay inequality
< 5 ns
Aqueous Washable
No
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA169d
Page 1 of 2
Dec-99(A)