SX37 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE- 20 to 90 Volts CURRENT- 3.0 Amperes

DATA SHEET
SX32~SX39
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE- 20 to 90 Volts CURRENT- 3.0 Amperes
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Metal to silicon rectifier. majority carrier conduction
• Low power loss,high efficiency
• High surge capacity
• For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications
• High temperature soldering guaranteed: 260°C /10 seconds
at terminals
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic
Terminals:Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Standard packaging: 12mm tape (EIA-481)
Weight: 0.002 ounce, 0.064 gram
SMA / DO-214AC
Unit: inch ( mm )
.181 (4.60)
.157 (4.00)
.012 (.305)
.006 (.152)
.060 (1.52)
.030 (0.76)
.008(.203)
.002(.051)
.208 (5.28)
.188 (4.80)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load.
Maximum Recurrent Peak Reverse Voltage
SYMBOLS _SX32
VRRM _20.0
Maximum RMS Voltage
VRMS 14.0
Maximum DC Blocking Voltage
VDC
20.0
Maximum Average Forward Rectified Current
at T_L (See figure 1)
I(AV)
Peak Forward Surge Current 8.3ms single half sine-wave superim-
posed on rated load (JEDEC method)
IFSM
Maximum Instantaneous Forward Voltage at 3.0A (Note 1)
VF
Maximum DC Reverse Current (Note 1) Ta= 25°C
IR
at Rated DC Blocking Voltage
Ta=100°C
Maximum Thermal Resistance(Note 2)
RθJL
RθJA
Operating and Storage Temperature Range TJ
Storage Temperature Range
T_J
T_STG
SX33
30.0
21.0
30.0
0.50
SX34
40.0
28.0
40.0
SX35
50.0
35.0
50.0
SX36 SX38 SX39 UNITS
60.0 80.0 _90.0 V
42.0 56.0 _{71.0 V}
60.0 80.0 _{90.0 V}
3.0
A
80.0
0.75
0.5
20.0
17.0
55.0
-50 to +150
-50 to +150
A
0.85
V
mA
mA
°C/W
°C
°C
NOTES:
A.Pulse Test with PW =300µsec, 2% Duty Cycle.
B.Mounted on P.C. Board with 14mm² (.013mm thick) copper pad areas.
DATE : OCT.03.2002
PAGE . 1