7100-1401-11135 Datasheet, PDF (4/5 Pages) Emcore Corporation – SNMPv2 Control Interface

Medallion 7100 CATV Fiber Amplifier
`
Erbium Doped Fiber Amplifier (EDFA)
DATASHEET | MARCH 2014
FIBER OPTICS
European Union “RoHS Directive” Compliance
Except for the exemption claimed herein for lead used in solder for network infrastructure equipment, all homogenous
materials contained in the product contain less than the maximum concentration levels for lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers permitted under the European Union
Directive 2002/95/EC (the "RoHS Directive").
Model Number Information
7100-□□-□□□□-□□□□□
Logo &
Customer
Specific
0= EMCORE
Logo
Gain
Flattened
0 = Gain
Flattened
1=No Logo
1 = Not Gain
Flattened
Output Power
per Port
Number of
Ports
Optics
Optical
Input
XX = xxdBm/port
(Maximum:
xx=21dBm)
01 = 1 port
02 = 2 ports
1 = SC/APC 1 = Front
2 = FC/APC 2 = Rear
Optical
Output
Optical
Monitor
Power
Supply
1= Front
2= Rear
1= Input
Front, Output
Front
1= AC primary,
no secondary
2= Input Rear, 2=DC primary,
Output Rear no secondary
04 = 4 ports
3 = E2000
08 = 8 ports
4 = SC/APC
Angled
10 = 10
ports
5= FC/APC
Angled
6= E2000
Angled
Note 1: Not all configurations are available; please contact your EMCORE Sales Representative.
e.g. 7100-1401-11135 (14 dBm per port, 1 port, SC/APC, Front Fiber, Dual DC)
e.g. 7100-1708-11133 (17 dBm per port, 8 ports, SC/APC, Front Fiber, Dual AC)
3 = None
3=AC primary,
AC secondary
4=AC primary,
DC secondary
5=DC primary,
DC secondary
| REV 2014.03
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.