RL1632W-6-R001F Datasheet, PDF (1/6 Pages) Delta Electronics, Inc. – 1W, 0612 Low Resistance Chip Resistor (Lead / Halogen Free)

1W, 0612 Low Resistance Chip Resistor (Lead / Halogen Free)
1. Scope
This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular
type for use in electronic equipment.
2. Type Designation
RL1632W - □ - □□□□ □
(1)
(2)
(3)
(4)
Where
(1) Series No.
(2) 6 = 1W
(3) Resistance value :
For example - -
R001 = 1mΩ
The “ R “ shall be used as a decimal point.
(4) Resistance value :
F = ± 1%
G = ± 2%
J = ± 5%
3. Outline Designation
(1) Substrate
(2) Resistor
(3) Terminals
(4) Marking
(5)Protection coat:
Code Letter
L
W
a
t
Alumina 96%
Cu-alloy
Sn (on Cu )
Heat resistive epoxy resin(White)
Heat resistive epoxy resin(Green)
Dimensions (mm)
RL1632W
1.6 ± 0.25
3.15 ± 0.25
0.35 ± 0.2
0.95 ± 0.25
Figure 1. Construction and Dimensions
UNLESS OTHERWISE SPECIFIED
TOLERANCES ON ﹕
X
=±
X.X = ±
X.XX = ±
ANGLES ± HOLE DIA. ±
DRAWN BY ﹕ connie 4/3/13
DESIGNED BY ﹕
CHECKED BY ﹕
APPROVED BY ﹕
SCALE ﹕ X UNIT ﹕ X
TITLE
:
The Engineering Spec. For 1W
Low Resistance Chip Resistor
0612
台達電子工業股份有限公司
Delta Electronics, Inc.
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF Delta Electronics, Inc.
AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE
MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION
DOCUMENT
NO.
PAGE
SMN60000NH
REV.
A0
PAGE 1 OF 6