RL1632W-4-R001F Datasheet, PDF (1/6 Pages) Daesan Electronics Corp. – 1/2W, 0612 Low Resistance Chip Resistor (Lead / Halogen Free)

1/2W, 0612 Low Resistance Chip Resistor (Lead / Halogen Free)
1. Scope
This specification applies to 1.6mm x 3.2mm size 1/2W, fixed metal film chip resistors rectangular
type for use in electronic equipment.
2. Type Designation
RL1632W - □ - □□□□ □
(1)
(2)
(3)
(4)
Where
(1) Series No.
(2) 4=1/2W
(3) Resistance value :
For example - -
R001 = 1mΩ
The “ R “ shall be used as a decimal point.
(4) Resistance value :
F = ± 1%
G = ± 2%
J = ± 5%
3. Outline Designation
(1) Substrate
(2) Resistor
(3) Terminals
(4) Marking
(5)Protection coat:
Code Letter
L
W
a
t
Alumina 96%
Cu-alloy
Sn (on Cu )
Heat resistive epoxy resin(White)
Heat resistive epoxy resin(Green)
Dimensions (mm)
RL1632W
1.6 ± 0.25
3.15 ± 0.25
0.35 ± 0.2
0.95 ± 0.25
Figure 1. Construction and Dimensions
UNLESS OTHERWISE SPECIFIED
TOLERANCES ON ﹕
X
=±
X.X = ±
X.XX = ±
ANGLES ± HOLE DIA. ±
DRAWN BY ﹕ connie 4/3/13
DESIGNED BY ﹕
CHECKED BY ﹕
APPROVED BY ﹕
SCALE ﹕ X UNIT ﹕ X
TITLE
:
The Engineering Spec. For 1/2W
Low Resistance Chip Resistor
0612
台達電子工業股份有限公司
Delta Electronics, Inc.
乾坤科技股份有限公司 ^{THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF Delta Electronics, Inc.}
AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE
MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION
DOCUMENT
NO.
PAGE
SMN40000NH
REV.
A2
PAGE 1 OF 6