LPS6235-682ML Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 587-1
Shielded Power Inductors–LPS6235 Series
• Low DCR; high current; shielded construction
• Perfect for backlight applications
Designer’s Kit C345 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 460 – 480 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 350/7″reel; 1500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 3.68 mm pocket depth
Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm
PCB washing Only pure water or alcohol recommended
DCR SRF
Isat (A)⁵
Inductance² max³ typ⁴ 10% 20% 30%
Part number¹ ±20% (µH) (Ohms) (MHz) drop drop drop
LPS6235-682ML_
6.8
0.075 55 2.6 2.7 2.8
LPS6235-822ML_
8.2
0.095 48 2.5 2.6 2.7
LPS6235-103ML_
10.0
0.100 37 2.3 2.4 2.5
LPS6235-123ML_
12.0
0.110 29 1.9 2.2 2.3
LPS6235-153ML_
15.0
0.125 25 1.9 2.0 2.0
LPS6235-183ML_
18.0
0.140 24 1.7 1.8 1.9
LPS6235-223ML_
22.0
0.145 24 1.6 1.7 1.7
LPS6235-333ML_
33.0
0.180 16 1.3 1.4 1.5
LPS6235-473ML_
47.0
0.245 13 1.1 1.2 1.2
LPS6235-563ML_
56.0
0.280 12 1.0 1.0 1.1
LPS6235-683ML_
LPS6235-823ML_
LPS6235-104ML_
LPS6235-124ML_
LPS6235-154ML_
68.0
82.0
100.0
120.0
150.0
0.345 10.8 0.90 0.94 0.96
0.315 10.0 0.46 0.52 0.55
0.375 9.0 0.46 0.52 0.54
0.435 8.3 0.44 0.48 0.51
0.535 7.3 0.37 0.43 0.45
LPS6235-224ML_
LPS6235-334ML_
LPS6235-474ML_
LPS6235-564ML_
LPS6235-684ML_
220.0
330.0
470.0
560.0
680.0
0.720
1.02
1.58
1.75
1.97
5.6 0.31 0.36 0.37
4.4 0.26 0.29 0.30
3.6 0.22 0.25 0.26
3.1 0.20 0.22 0.23
2.8 0.17 0.19 0.21
LPS6235-824ML_ 820.0
2.70
2.5 0.16 0.18 0.19
LPS6235-105ML_ 1000.0
3.20
2.2 0.14 0.17 0.18
LPS6235-155ML_ 1500.0
4.60
1.9 0.12 0.13 0.14
LPS6235-185ML_ 1800.0
5.42
1.7 0.11 0.12 0.13
LPS6235-225ML_ 2200.0
6.40
1.5 0.090 0.11 0.11
LPS6235-335ML_
LPS6235-475ML_
LPS6235-565ML_
LPS6235-685ML_
LPS6235-825ML_
3300.0
4700.0
5600.0
6800.0
8200.0
8.90
14.0
16.4
21.4
24.0
1.1 0.080
0.94 0.070
0.86 0.070
0.80 0.070
0.70 0.062
0.090
0.077
0.080
0.075
0.070
0.10
0.084
0.085
0.080
0.078
LPS6235-106ML_ 10000.0 29.0
0.61 0.059 0.067 0.074
Irms (A)⁶
20°C 40°C
rise rise
1.30 1.90
1.30 1.85
1.28 1.80
1.25 1.75
1.22 1.70
1.20 1.65
1.10 1.60
1.00 1.30
0.80 1.15
0.75 1.07
0.73 1.00
0.72 0.95
0.70 0.90
0.60 0.80
0.53 0.73
0.45 0.64
0.40 0.55
0.36 0.50
0.33 0.46
0.28 0.40
0.26 0.33
0.24 0.30
0.19 0.26
0.18 0.23
0.16 0.22
0.14 0.180
0.12 0.150
0.10 0.130
0.090 0.120
0.085 0.115
0.075 0.095
1. Please specify termination and packaging codes:
LPS6235-106MLC
Termination: L= RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (350 parts per
full reel).
B= Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (1500 parts per full
reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
Document 587-1 Revised 10/17/08
© Coilcraft, Inc. 2009