LPS6225-104MLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors - LPS6225

Document 554-1
Shielded Power Inductors – LPS6225
• Low DCR; high current; shielded construction
• Perfect for backlight applications
Designer’s Kit C349 contains 3 each of all values
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  309 – 331 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  750/7″ reel; 2500/13″ reel  Plastic tape:  12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth
Recommended pick and place nozzle  OD: 6.2 mm;  ID: ≤ 3.1 mm
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.

DCR SRF
  _{Isat (A)}5 _{    Irms (A)}6
^  Inductance^{2  } max^{3  } typ⁴ 10% 20% 30% 20°C 40°C
  _{Part number}1 _{± 20% (µH) (Ohms) (MHz) drop drop drop rise rise}
LPS6225-122ML_
LPS6225-222ML_
LPS6225-332ML_
LPS6225-472ML_
LPS6225-682ML_
1.2 0.040 178 5.3 5.4 5.4 1.1 1.65
2.2 0.045 100 3.9 4.0 4.1 1.0 1.40
3.3 0.055 68 3.5 3.5 3.6 1.0 1.35
4.7 0.065 53 3.0 3.1 3.2 0.90 1.30
6.8 0.095 40 2.6 2.7 2.8 0.90 1.30
LPS6225-103ML_ 10
LPS6225-153ML_ 15
LPS6225-223ML_ 22
LPS6225-333ML_ 33
LPS6225-473ML_ 47
0.105 35 2.1 2.1 2.2 0.90 1.30
0.135 23 2.1 2.2 2.2 0.85 1.20
0.175 17 1.4 1.5 1.6 0.80 1.10
0.260 14 1.1 1.2 1.2 0.65 0.90
0.360 10 0.98 1.0 1.0 0.60 0.80
LPS6225-683ML_ 68
LPS6225-104ML_ 100
LPS6225-124ML_ 120
LPS6225-154ML_ 150
LPS6225-224ML_ 220
0.420
0.610
0.750
0.920
1.30
9.6 0.58 0.61 0.62 0.57 0.74
7.7 0.48 0.51 0.52 0.47 0.64
7.4 0.42 0.45 0.46 0.43 0.58
6.4 0.39 0.41 0.42 0.40 0.54
5.0 0.32 0.34 0.35 0.37 0.50
LPS6225-334ML_
LPS6225-474ML_
LPS6225-684ML_
LPS6225-105ML_
LPS6225-155ML_
330
470
680
1000
1500
2.00 3.8 0.26 0.27 0.28 0.28 0.39
2.60 3.2 0.22 0.23 0.24 0.24 0.37
4.00 2.8 0.18 0.19 0.20 0.18 0.26
6.00 2.3 0.15 0.16 0.17 0.15 0.24
9.00 1.8 0.12 0.13 0.13 0.13 0.20
LPS6225-185ML_ 1800
11.7
LPS6225-225ML_ 2200
13.5
LPS6225-335ML_ 3300
21.0
LPS6225-475ML_ 4700
30.0
LPS6225-565ML_ 5600
36.0
1.7 0.11
1.3 0.10
1.1 0.099
0.90 0.086
0.72 0.083
0.12
0.10
0.10
0.096
0.090
0.12
0.11
0.11
0.10
0.096
0.11 0.14
0.11 0.13
0.080 0.11
0.075 0.090
0.070 0.090
LPS6225-685ML_ 6800
43.0
LPS6225-825ML_ 8200
54.0
LPS6225-106ML_ 10000
70.0
0.70 0.080 0.086 0.089 0.065 0.080
0.69 0.079 0.086 0.088 0.060 0.075
0.68 0.075 0.084 0.087 0.060 0.065
1. Please specify termination and packaging codes:
LPS6225-106MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape (750 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (2500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 554-1  Revised 12/01/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.