LPS5030 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 581-1
Shielded Power Inductors – LPS5030
• Very low DCR; excellent current handling
• 4.9 × 4.9 mm footprint; less than 3 mm tall
Designer’s Kit C420 contains 3 each of all values
Core material Ferrite
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight  226 – 244 mg
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  750/7″ reel; 2500/13″ reel  Plastic tape:  12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth
Recommended pick and place nozzle  OD: 5 mm;  ID: ≤ 2.5 mm
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.

DCR SRF
^  Inductance^{2  } max^{3  } typ⁴
  _{Part number}1 _{±20% (µH) (Ohms) (MHz)}
LPS5030-901MR_
LPS5030-122MR_
LPS5030-172MR_
LPS5030-222MR_
LPS5030-332MR_
0.90 0.040 250
1.2
0.043 210
1.7
0.051 190
2.2
0.057 168
3.3
0.066 125
LPS5030-472MR_
4.7
LPS5030-562MR_
5.6
LPS5030-682MR_
6.8
LPS5030-822MR_
8.2
LPS5030-103MR_ 10.0
0.083 84
0.089 70
0.099 56
0.125 45
0.127 30
LPS5030-123MR_ 12.0
LPS5030-153MR_ 15.0
LPS5030-183MR_ 18.0
LPS5030-223MR_ 22.0
LPS5030-333MR_ 33.0
0.155 24
0.160 32
0.170 27
0.190 24
0.260 19
LPS5030-473MR_
LPS5030-683MR_
LPS5030-823MR_
LPS5030-104MR_
LPS5030-124MR_
47.0
68.0
82.0
100
120
0.330 16
0.440 12
0.470 11
0.600 10
0.800 9
LPS5030-154MR_ 150
LPS5030-224MR_ 220
LPS5030-334MR_ 330
LPS5030-474MR_ 470
LPS5030-564MR_ 560
0.860 7.5
1.35
6.0
1.80
5.0
2.80
4.0
3.20
3.6
LPS5030-684MR_
LPS5030-105MR_
LPS5030-155MR_
LPS5030-185MR_
LPS5030-225MR_
680
1000
1500
1800
2200
3.80
3.0
5.10
2.5
7.60
2.0
10.0
1.8
11.0
1.6
LPS5030-335MR_ 3300
19.5
1.3
LPS5030-475MR_ 4700
26.0
1.1
  _{Isat (A)}5 _{    Irms (A)}6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
3.8 4.0 4.1 2.10 2.80
3.5 3.6 3.7 2.00 2.65
3.0 3.2 3.3 1.90 2.50
2.9 3.1 3.2 1.60 2.15
2.3 2.5 2.6 1.40 1.80
1.9 2.0 2.0 1.30 1.75
1.8 1.8 1.9 1.25 1.65
1.6 1.7 1.7 1.20 1.60
1.6 1.7 1.7 1.10 1.55
1.4 1.4 1.4 1.00 1.50
1.3 1.4 1.4 0.95 1.40
0.80 0.90 0.90 0.92 1.40
0.80 0.82 0.87 0.90 1.30
0.70 0.75 0.78 0.88 1.25
0.60 0.63 0.64 0.85 1.20
0.50 0.53 0.55 0.75 1.00
0.40 0.43 0.44 0.65 0.900
0.38 0.40 0.40 0.60 0.830
0.27 0.31 0.32 0.55 0.750
0.26 0.29 0.30 0.45 0.660
0.22 0.25 0.263 0.42
0.21 0.235 0.245 0.36
0.155 0.155 0.200 0.32
0.117 0.134 0.146 0.28
0.110 0.130 0.140 0.23
0.570
0.500
0.420
0.370
0.320
0.100 0.120 0.126 0.20
0.100 0.110 0.110 0.18
0.068 0.080 0.089 0.15
0.069 0.081 0.086 0.13
0.063 0.074 0.080 0.10
0.290
0.250
0.210
0.170
0.150
0.056 0.063 0.067 0.090 0.125
0.049 0.056 0.059 0.080 0.110
1. Please specify termination and packaging codes:
LPS5030-105MRC
Termination: R= RoHS compliant matte tin over
nickel over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (750 parts
per full reel).
B= Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter C
instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (2500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A impedance analyzer or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified induc-
tance drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient. This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Document 581-1  Revised 09/02/15