LPS52 Datasheet, PDF (1/3 Pages) Artesyn Technologies – Total Power: 55 - 60 Watts

POWER
Data Sheet
LPS50 Series
60 Watts
Total Power: 55 - 60 Watts
Input Voltage: 90 - 264 Vac
127 - 300 Vdc
# of Outputs: Single
SPECIAL FEATURES
ƒƒ Universal input
ƒƒ 2” x 4” footprint
ƒƒ Less than 1U high
ƒƒ Remote sense
ƒƒ Overload and short circuit protection
ƒƒ Adjustable output voltage
ƒƒ High efficiency
ƒƒ High MTBF
ƒƒ Built in EMI filter (CISPR 22 Class B)
ƒƒ LED power good indicator
ƒƒ Input power < 74 watts
ƒƒ Complies with EN61000-3-2
ƒƒ RoHS compliant
ƒƒ UL Class I approved
ƒƒ LPS52(-I) and LPS53(-I) extended
temperature option: -40 °C to +80 °C
ƒƒ LPX100 enclosure kit available
SAFETY
ƒƒ UL
ƒƒ TUV
ƒƒ CB
ƒƒ CE
UL 60950-1
CAN/CSA-C22.2 60950-1
EN60950-1
Certificate and report
LVD & EMC
Electrical Specifications
Input
Input range
90 - 264 Vac (wide range)
127 - 300 Vdc
Frequency
47 - 440 Hz
Inrush current
<60 A peak @ 230 Vac, cold start @ 25 °C
Input power
<74 Watts
Efficiency
80 - 85% typical at full load
EMI/RFI
FCC Class B conducted; CISPR22 Class B conducted; EN55022 Class
B conducted; VDE0878PT3 Class B conducted.
Safety ground
leakage current
<0.5 mA @ 50/60 Hz; 264 Vac input for class I; <0.25 mA @ 50/60 Hz;
264 Vac input for class II
Output
Maximum power
60 W for convection (LPS52 is 55 W)
Adjustment range
+20% minimum
Hold-up time
10/20 ms 115/230 Vac input line
Overload protection
Short circuit protection on all outputs.
Case overload protected @ 110-160% of normal rating
Overvoltage protection 30% to 50% above nominal output
Remote sense
Compensates for 0.5 V lead drop max. Will operate without remote
sense connected. Reverse connection protected.