LPQ172 Datasheet, PDF (1/4 Pages) Artesyn Technologies – Total Power: 110 - 175 Watts

POWER
Data Sheet
Total Power: 110 - 175 Watts
Input Voltage: 85 - 264 Vac
120 - 300 Vdc
# of Outputs: Quad
SPECIAL FEATURES
ƒƒ Active power factor correction
ƒƒ IEC EN61000-3-2 compliance
ƒƒ Adjustable outputs on 1, 3 & 4
Remote sense on main output
ƒƒ Single wire current sharing
ƒƒ Power fail and remote inhibit
ƒƒ Built-in EMI filter
ƒƒ Low output ripple
ƒƒ Overvoltage protection
ƒƒ Overload protection
ƒƒ Thermal overload protection
ƒƒ DC power good
ƒƒ 5 V standby output
ƒƒ Adjustable floating 4th output
ƒƒ Optional cover (-C suffix)
ƒƒ RoHS compliant
SAFETY
ƒƒ UL
UL60950
ƒƒ CB
Certificate and report
ƒƒ CSA
CSA 22.2-234 Level 3
ƒƒ CE
Mark (LVD)
ƒƒ NEMKO EN 60950/EMKO-TUE
LPQ170 Series
175 Watts
Electrical Specifications
Input
Input range
85-264 Vac; 120-300 Vdc
Frequency
47-67 Hz
Inrush current
38 A max, cold start @ 25°C
Efficiency
75% typical at full load
EMI filter
Meets FCC Class B conducted
CISPR 22 Class B conducted
EN55022 Class B conducted
VDE 0878 PT3 Class B conducted
Power factor
0.99 typical
Safety ground leakage current 1.0 mA @ 50/60 Hz, 264 Vac input
Output
Maximum power
110 W convection (75 W with cover)
85 W convection - LPQ173
175 W with 30 CFM forced air
(130 W with cover - LPQ172)
Adjustment range
3.3 - 5.5V on main; -12 - 15V on 3rd output
3.3 - 25 V on 4th output - LPQ172
3.3 - 5.5 V on 4th output - LPQ173
Hold-up time
20 ms @175 W load at nominal line
Overload protection
Short circuit protection on all outputs. Case overload protected
@ 110-145% above peak rating
Overvoltage protection
Tracks outputs 1, 3 & 4; 15 to 35%
Standby output
5 V @ 200 mA regulated ±5%